Main departments of Tianjin Petroleum Vocational and Technical College

Petroleum engineering department is one of the key development and construction departments of the college. Its advantage lies in closely surrounding the petroleum industry, one of the four pillar industries in China, and creating the characteristics of the petroleum industry.

Specialty: The Department of Petroleum Engineering offers four major petroleum majors: drilling technology, oil and gas exploitation technology, oil and gas storage and transportation technology and petroleum engineering technology.

Faculty: Petroleum Engineering Department has a strong faculty, including 35 full-time teachers, professional teachers 19, 4 associate professors or above, lecturers 10, 8 masters or above, and double-qualified teachers 15.

Training base: Petroleum engineering training base is listed as "National Demonstration Training Base for Vocational Education and Training in Petroleum Industry" by China Petrochemical Association. The training base includes petroleum engineering special skills training center, computer simulation and data processing center, petroleum engineering comprehensive skills training center and oil production comprehensive skills training center, equipped with complete sets of drilling rigs, single wells, metering rooms, water distribution rooms, joint stations and other large-scale equipment, as well as the latest imported and purchased advanced simulation instruments and equipment. There are vocational qualification training centers for intermediate workers such as drilling, oil production, underground, gathering and transportation, well control, etc., which can meet the requirements of skills training for students majoring in petroleum, refining, oil storage and transportation, drilling and oil and gas exploitation, pre-job training for enterprise employees, on-the-job training and retraining for technicians. Students can obtain vocational qualification certificates for various types of jobs when they graduate.

Employment: The College has a good interactive relationship with large state-owned enterprises, wholly foreign-owned enterprises, large private enterprises and joint-stock enterprises under PetroChina, CNOOC and Sinopec. Establish school-enterprise cooperation with North China Oilfield, Dagang Oilfield, Jidong Oilfield, Xinjiang Oilfield, Zhongyuan Oilfield, Daqing Refining and Chemical Company, Dushanzi Petrochemical Company, North China Petrochemical Company and other units to carry out order training. It has built a good platform for students' internship and employment.

Introduction of drilling technology specialty

Training objective: to train applied senior technical talents in petroleum drilling, completion and cementing engineering.

Business scope: engaged in the design, organization and production of drilling, completion and cementing, as well as the collection, collation, analysis and technical management of data during construction.

The main contents of professional teaching: engineering drawing, engineering mechanics, engineering fluid mechanics, electrical and electronic foundation, basic design foundation, petroleum geology foundation, drilling engineering, drilling machinery, petroleum engineering instruments, drilling fluid, well control technology, oil and gas reservoir protection technology, underground engineering and other courses and corresponding practical contents.

Brief introduction of oil and gas exploitation technology specialty

Training objective: to train applied senior technical personnel for production, management and service of oil production engineering and completion engineering.

Business scope: engaged in the practical operation of various positions in oil production engineering technology, responsible for the collection, collation and analysis of oil production data, the maintenance, testing and use of oil production tools and equipment, and the specific organization, implementation and management of oil and gas well construction and oil production.

The main contents of professional teaching include: engineering mechanics, seepage mechanics, reservoir physics, oil and gas field development geology, petroleum engineering instruments, oil recovery machinery, tertiary oil recovery principle, reservoir engineering, downhole engineering, oil and gas reservoir protection technology and other courses and corresponding practical contents.

Brief introduction of oil and gas storage and transportation technology specialty

Training objective: to train applied senior technical talents in oil and gas storage, transmission and distribution, sales and oil depot management.

Business scope: engaged in the overall design, installation, commissioning, operation, maintenance and marketing of oil and gas products in oil and gas gathering and transportation, pipeline construction, oil field construction, gas station and reservoir management.

The main contents of professional teaching include: engineering fluid mechanics, heat transfer, electrical and electronic technology, petroleum instrument and its automation, oil and gas gathering and transportation engineering, metal corrosion and protection, oil depot design and management, urban gas transmission and distribution, petrology, pumps and compressors, oil and gas pipeline transportation technology, petroleum metering and other courses and corresponding practical contents.

Brief introduction of petroleum engineering technology specialty

Main courses: computer application foundation, engineering drawing, mechanical design foundation, engineering mechanics, engineering fluid mechanics, electrical and electronic foundation, petroleum geology, petroleum engineering instruments.

Professional direction 1: oil production engineering, oil production machinery, reservoir engineering, reservoir physics, tertiary oil recovery principle and reservoir protection technology.

Specialty 2: drilling engineering, drilling machinery, drilling fluid, well control technology, downhole engineering and reservoir protection technology.

Graduation requirements: Obtain the certificate of national college students' practical English application ability above Grade B, and the intermediate vocational skill certificate of drilling or oil production.

Professional ability: have the initial ability to apply basic theory to analyze and solve practical problems in petroleum engineering and carry out technological innovation; Have the basic ability to apply basic theory and knowledge to oil and gas drilling and production engineering design; Have certain practical skills; Have the preliminary ability to read and translate professional foreign language books and periodicals.

Employment direction: engaged in drilling and oil production engineering and technical work, as a drilling and oil production technician, responsible for oil and gas well construction and oil production operations, responsible for the collection, collation and analysis of drilling and oil production data, able to maintain, test and use drilling and oil production tools and equipment, and also able to complete some engineering design work of drilling and oil production. Major: The Department of Resource Exploration has three majors: oil and gas geological exploration technology, geophysical logging technology and engineering survey technology.

Faculty: The Department of Resource Exploration has a strong faculty, including old teachers who are rigorous in their studies and exemplary, middle-aged teachers who are young and experienced, and a group of young teachers who are determined to forge ahead and have the courage to innovate. There are 26 full-time teachers, including 6 associate professors or above, lecturer 13, master 1 7, double-qualified teacher 13.

Training base: The Department of Resource Exploration has complete experimental training facilities and advanced training methods. Practice teaching emphasizes mobilizing students' enthusiasm, improving students' practical ability and making practice courses close to the scene. At present, there are many on-campus training bases such as geological laboratory, geological training room, logging training room and engineering measuring instrument room, and there are seven off-campus training bases, which can meet the requirements of teaching, training, student skills training, pre-job training of enterprise employees, on-the-job training and retraining of technicians. When students graduate, they can obtain professional qualification certificates of corresponding jobs.

Employment situation: According to the school-running idea of "people-oriented, highlighting characteristics, relying on oil fields and serving local areas", we have good cooperative relations with large state-owned enterprises, private enterprises and joint-stock enterprises affiliated to PetroChina and CNOOC, and have built a good platform for students' internship and employment, with an employment rate of over 90%.

Brief introduction of petroleum and natural gas geological exploration technology specialty

Training objective: to train applied senior technical personnel who have obtained primary training for oil and gas exploration and development geologists.

Scope: Engaged in geological exploration, comprehensive geological analysis and technical management of oil and gas fields, factories and mines.

The main contents of professional teaching include: sedimentary petrology and sedimentary facies, structural geology, petroleum geology, reservoir physics, oil and gas field underground geology, petroleum geophysical logging, seismic underground geology, seismic data processing and other courses and corresponding practical contents.

Brief introduction of geophysical logging technology specialty

Training objective: to train applied senior technical talents in resources, energy, basic engineering, mine production and management.

Main courses: geological foundation, structural geology, logging method principle, production logging, logging engineering, logging data processing and interpretation, logging instrument principle and other courses and corresponding practical contents.

Experimental training base: logging data processing and interpretation training room, logging technology training room and logging instrument training room.

Employment field: Mainly engaged in the operation process and production organization management of logging instruments, real-time monitoring and acceptance of logging data and quality control of logging data, maintenance of downhole logging instruments, comprehensive interpretation of conventional logging (data processing, formation evaluation and reservoir decision-making), identification and evaluation of special logging (imaging logging) data, production logging analysis, reservoir evaluation, reservoir management, introduction and research and development of new logging technology, etc. Engaged in resource investigation, basic engineering, mine geophysical logging production and management.

Brief introduction of engineering survey technology specialty

Training objective: to train applied senior technical talents who are engaged in engineering construction lofting, construction control survey, engineering survey, topographic survey and other aspects in the front line of engineering construction, surveying and mapping production.

Business scope: engaged in engineering survey, topographic survey, control survey, cadastral survey and mine survey in urban construction, land and resources management, water conservancy and hydropower, traffic construction, agriculture, environmental protection, geology and mineral resources, etc.

The main contents of professional teaching include: computer application foundation, engineering drawing and surveying, database technology and application, Auto CAD, surveying, surveying adjustment, control surveying, engineering surveying, GPS principle and application, aerial photogrammetry, cadastral surveying, digital mapping and other courses and practical contents. Major: The Department of Electronic Information offers three majors: applied electronic technology, production process automation technology and computer network technology.

Faculty: The Department of Electronic Information has a strong faculty and a reasonable team structure. There are 4 teaching and research sections, including 38 teaching and administrative staff, 35 full-time teachers, 6 senior titles, 8 graduate students, Tianjin excellent teachers, and double-qualified teachers.

Introduction of applied electronic technology specialty

Training objective: to train applied senior technical personnel for the production, use and maintenance of electronic products and equipment.

Main courses: electrical technology, electronic circuits and electronic devices, C language programming, computer interface technology, electronic measuring instruments and intelligent instruments, automatic test and conversion technology, electronic circuit CAD, television technology, electronic assembly technology and equipment, electric drive and control technology, power supply and distribution technology, programmable control technology (PLC), communication technology and other courses and practical skills training, virtual instrument training, electronic circuit diagram reading training, vocational skills forensics training, etc.

Experimental training base: 1, electronic technology laboratory 2, audio and video technology laboratory 3, virtual instrument laboratory 4, communication principle laboratory 5, electronic skills training room 6, (PCB) printed circuit board manufacturing process training room 7, (SMT) surface mounting process training room 8, electronic circuit fault detection and troubleshooting training room 9, electronic machine assembly process training room 10, single chip microcomputer.

Employment fields of graduates: engaged in microelectronic assembly technology, equipment maintenance, electronic measurement, electronic instrument equipment maintenance and production process management, electronic product promotion, marketing and after-sales service, simple electronic product development and installation, low-voltage electrical equipment debugging and maintenance.

Brief introduction of production process automation technology specialty

Training objectives: to train advanced technical application-oriented professionals such as performance analysis, debugging, installation, maintenance and technical management of production process detection and automation systems and equipment; Cultivate applied senior technical talents in the use and maintenance of production process automation equipment and electrical equipment.

Main courses: electrician foundation, electronic technology, motor dragging technology, chemical measurement and instrument, automatic control principle, computer control technology, factory electrical control equipment, microcomputer principle and application, programmable controller and application, factory power supply and distribution technology, automatic control system, configuration control technology, C language programming, frequency conversion technology, virtual instrument, electronic CAD technology, process control technology, industrial network and field bus, electrical basic skills training, electrician.

Experimental training base: 1, circuit foundation laboratory 2, motor control laboratory 3, inverter technology laboratory 4, computer control laboratory 5, single chip microcomputer training laboratory 6, PLC control laboratory 7, electrical control basic skills training laboratory 8, electrical comprehensive training laboratory 9, sensor and detection laboratory 10, electrical skills training laboratory.

Employment field of graduates: engaged in technical work such as installation, debugging, operation, maintenance, transformation and management of production process automation systems and automation instruments; Technical work such as installation, debugging, operation, maintenance, transformation and management of automatic production lines and electrical equipment; Production, sales, technical service and technical management of electrical products.

Brief introduction of computer network technology specialty

Training objective: to train high-skilled personnel engaged in computer network management, computer system management, computer maintenance and application needed by the front line of production, management, service and construction.

Main courses: Flash animation design, C programming, network foundation, Photoshop image processing, programming language foundation, microcomputer maintenance and repair, web page production and design, Flash animation design training, C programming training, programming language foundation training, image processing training and web page design training. Windows 200X server configuration and management, network security technology, network equipment configuration, LAN construction and maintenance, database principle and SQL language, integrated wiring technology, Windows configuration and management practice, network equipment configuration training, LAN networking practice, and network database query design. Among them, five courses, such as LAN construction, Windows200X configuration and management, network equipment configuration, network security technology and integrated wiring technology, are professional core courses.

Experimental training base: two professional comprehensive training rooms, namely computer network technology training room and network integrated wiring technology training room.

Employment field of graduates: engaged in computer network infrastructure construction, network system integration, network operation management and system maintenance, network application development, daily network management, security setting and related development in enterprises and institutions and technical and administrative departments. Teacher: There are five teaching and research sections and a machining center in department of mechanical engineering. There are 4/kloc-0 full-time teachers, including senior title 12, intermediate title 22, doctoral students 2, master students 12 and "double-qualified" teachers 34. Strong teachers and reasonable team structure.

Major: There are three higher vocational majors in department of mechanical engineering: automobile inspection and maintenance technology, numerical control technology, welding technology and its automation. Among them, the major of numerical control technology and the major of automobile inspection and maintenance technology are the backbone majors of our college.

Department characteristics: pay attention to department construction, strive to create a harmonious, United and upward collective atmosphere, and strengthen service awareness. In the annual assessment of the college, it has been an advanced unit at the college level for two consecutive years and won the honorary title of bureau-level and college-level advanced party branch for many times; Attach importance to teaching reform, with good teaching quality, high level and remarkable achievements in teaching and scientific research. Many teachers have won prizes in Tianjin and national quality class competitions and courseware competitions. The courses such as Automobile Structure, Fundamentals of Mechanical Design, Mechanical Drawing and Tolerance Coordination and Measurement are excellent courses at the college level. Pay attention to the cultivation of students' skills, emphasize students' practical ability, and actively organize students to learn various skills in their spare time and obtain corresponding post grade certificates. Many students won prizes in the Tianjin Skills Competition, and two students majoring in automobile won the first prize in the Skills Competition and were sent to ordinary undergraduate colleges for further study. Adhere to teaching and educating people, strengthen student management and foster education, strive to improve students' quality, actively carry out the second class, and enrich students' amateur cultural life.

Experimental training base: Our department has modern machining center, automobile maintenance technology training base and various welding equipment, including CNC machining training center, Pujia training center, fitter training center, CAD/CAM training room, CNC system debugging and maintenance comprehensive training room, CNC simulation training room, tolerance matching and technical measurement training room, hydraulic and pneumatic laboratory, automobile construction and maintenance laboratory, automobile inspection technology training room and automobile electronic control technology training room.

Employment situation: The college implements the "double certificate system" (one certificate with multiple certificates), and graduates of our department can obtain intermediate or advanced skill certificates of corresponding majors and automobile driving licenses required by auto repair majors. Graduates with high quality and good reputation are welcomed and praised by all walks of life and employers. They have established long-term employment agreements with many enterprises in mold processing, equipment manufacturing, automobile, auto repair and auto insurance, such as Tianjin, Beijing, North China and North China Oilfield Company. The demand for graduates is in short supply, and the employment rate of previous graduates has reached over 95%.