Beginners get a new camera, don't do these stupid things.

Beginners get a new camera, don't do these stupid things.

First, check whether the camera accessories are complete.

Body, lens, battery, adapter, shoulder strap.

Second, check the seal and security code.

The anti-counterfeiting mark is located in the upper right corner of the package, and you can see the 16 digital anti-counterfeiting code when you tear it open. You can go to Canon China official website to check.

Third, check the model and check the four yards in one.

When you get the camera after unpacking, you must first check whether the camera model is the same as when you bought it. These four codes include:

A, the serial number under the barcode on the camera box.

B, the serial number on the bottom of the camera.

C. the serial number on the camera warranty card.

D, camera serial number.

Fourth, remember to charge the camera battery.

After many friends got the camera, they couldn't wait to put on the battery and go out to shoot, but after taking it out, they found that the battery of the camera was dead soon. So charge the battery after receiving the camera out of the box!

① Remove the battery protection box.

② Put the battery into the battery box.

③ The power cord is connected to the charger, and the plug is inserted into the socket.

The orange light flashes when charging, and the green light is always on when charging. The new machine usually needs to be fully charged for 4 hours, and then it can be charged for 2~3 hours.

Five, install the memory card

The camera can only take pictures if it is equipped with a memory card, otherwise it can't store images.

64G/ 128G is enough for daily shooting. 95MB/S marked on the card surface refers to the storage speed. If the camera shows "BUZY" when shooting, the card speed is too slow.

Sixth, open the lens lock to take pictures.

In some zoom lenses, the lens has a lens lock. If you don't open the lens lock, the lens will always be locked and you can't take pictures. The rotation/retraction of the lens requires holding down the locked scriber.

Seven, don't shoot a pure black and white background.

Shoot a white wall or a pure black background at the camera. Because there is no subject, the camera will not focus. If you have to shoot, please set the focus mode to manual mode for focus shooting.

Eight, don't shoot the sun directly with the camera.

You can't shoot the sun directly with your camera, especially at noon. When the sun is near the composition range, the focus of sunlight through the lens will cause a fire and burn out the internal components of the camera. In addition, using the viewfinder to watch strong light or sunlight may cause permanent visual damage. If you have to shoot, remember to go to Budd film or high-power ND mirror to dim the light.

Nine, adjust the parameters according to the shooting environment

Photography Xiaobaimen likes to directly use the parameters summarized by experienced people. In fact, these parameters should only be used as a reference. Camera parameters are never fixed values. They are influenced by many factors, such as shooting environment, time, light and so on, and they can't take the same photos with the same parameters. You should adjust yourself to shoot on the basis of reference.

Ten, choose the correct focal length lens

When shooting, choose to use lenses with different focal lengths, and the picture effect is different. Scenery/architecture: wide-angle lens, portrait: large aperture fixed-focus lens, bird shot/lotus shot/concert: telephoto lens, street sweeping/travel/humanities: zoom lens.

Eleven, set the sensitivity.

Sensitivity determines the camera's sensitivity to light, but the improvement of photo brightness is at the expense of image quality. It can be set to 100 during the day, and the sensitivity needs to be controlled according to the maximum aperture and shutter value at night. The larger the ISO value, the more sensitive the light sensitivity, the brighter the picture and the more noise. The smaller the ISO value, the weaker the sensitivity, the darker the picture and the less noise.

Twelve, set the shutter

Whether the photos taken by the camera are burnt or not is largely due to the slow shutter speed setting. Generally, the shutter speed should not be lower than1125s during hand-held shooting. If it is lower than this value, you can use a tripod to assist shooting.

Thirteen, choose the output format

Many friends always feel that the photos taken by the camera lack a little feeling, so they want to post-color the photos. At this time, we need to set the camera's photo format to a -RAW format when taking pictures. Files in RAW format can retain more colors and details of photos. There will be more room for adjustment in the later revision.

Fourteen, set the autofocus

The camera has auto focus/manual focus mode, which will affect whether the photo is pasted or not. There may be the following reasons for burning photos:

1. The camera is too close.

Each lens has the closest focal length. If the lens is too close, it will lose focus and the shutter will not press. We need to expand the shooting distance.

2. Wrong focus mode selection

When we choose the focusing mode, if we choose MF manual focusing, we need to rotate the docking ring and sell it ourselves. If AF is docked automatically, we only need to set the shooting mode, and the focus camera will help us.