How to make a lampshade? Specific manufacturing steps of lampshade

Now everyone wants to do what they like, so many DIY things have become popular. Everyone doesn't like being in a rut. DIY, some things you like have more feelings and a sense of accomplishment. Next, Bian Xiao introduces some DIY methods of lampshades. Making a lovely lampshade by yourself can not only protect your eyes, but also have more fun. This is not just about making a lampshade.

Tools needed to make lampshades

A. 14 inch gasket, metal lampshade frame and base.

B. mats and pencils

C. art knife

D. cutting the operating table.

Six feet of double-sided tape

F. scissors

G. 1 and 1 code cloth.

H. 1 1/2 1 yard wide lace.

I. Lamp holder

Manufacturing method of lampshade

Specific manufacturing steps of lampshade 1: measurement and cutting.

1. Measure and write down the circumference of the lampshade.

2. Mark the circumference of the cloth with a pencil at 1 1 and 1 inch, and reserve 1 inch. The length of the lampshade will be 10 inch, leaving 3/4 inch at each end for the opening of the joint.

3. Cut out the double-sided adhesive tape and wallpaper with the width of 10 inch (do not overlap).

4. Cut the double-sided adhesive tape into eight strips, with a length of 14 inch and a width of 1 inch.

Measure and write down the circumference of the lampshade Measure and write down the circumference of the lampshade.

Cut out the double-sided tape and wallpaper with the width of 10 inch (do not overlap). Cut out the double-sided tape and wallpaper with the width of 10 inch (do not overlap).

Before making, iron the cloth and put it on a flat surface for later use.

The specific manufacturing step 2 of lampshade: leveling and pasting.

5. Stick the double-sided adhesive tape to the top of the back of the cloth, leaving 3/4 inch up and down. Tear off only a few inches of tape at a time to prevent bubbles.

6. Tear off the tape on the back of the double-sided adhesive tape and paste the wallpaper. The patterned side must face itself.

7. Put down the wallpaper cloth. Stick several strips of 1 inch tape on the top edge of the cloth and 1 inch tape on the edge of the wallpaper. The whole periphery of the cloth should be covered, and the above steps should be repeated at the bottom edge of the cloth, thus completing the closed sewing of the whole frame.

Stick double-sided adhesive

Wallpaper. Wallpaper.

The ideal position of lampshade is 2/3 of the height of lampholder.

The specific manufacturing steps of lampshade: winding and trimming.

8. With the help of your partner, start winding the lampshade frame. Start with the ring at the bottom of the lampshade. One person holds the longer end of the wallpaper, while the other person slowly tears off one side of the double-sided tape and presses the cloth tightly on the metal ring.

9、? Repeat the above steps around the ring at the top of the lampshade to ensure that the pattern of the gasket faces the inside of the lampshade, that is, the pattern faces down when the lampshade is erected.

10. Fold the edge inward by one inch to make the joint clean and flawless.

Metal ring? Wrap the metal ring.

Press the cloth tightly against the metal ring? Press the cloth tightly against the metal ring.

Wrap the metal ring and turn the metal frame while sticking to the lampshade.

Specific manufacturing steps of lampshade 4: upper frame

Complex hint: Lace is actually a fancy name for decorative binding.

1 1, ribbon-cutting length 15 inch.

12. Stick a double-sided adhesive tape on the inside and outside of the top of the lampshade, and stick the decorative tape on the adhesive tape on the outside of the lampshade from the joint. After gluing for a circle, cut off the remaining lace to ensure the tidy place. Then fold the lace inward from the top of the lampshade to the frame and carefully stick it to the adhesive tape inside.

13、? Repeat the above steps to complete the bottom of the lampshade.

There are many ways to make lampshades. These are just lampshades made in Bian Xiao. Of course, the lampshades of different lamps can be made differently and have their own theme style. You can try it first, then give full play to your imagination, and then make some different lampshades to turn your ideas into objects. I believe there will be different lampshades, so that this busy time can give me a fun world. Start simply and slowly.