How to make multiple exposures?

Question 1: How to shoot multiple exposures? As shown below, some digital cameras have the function of multiple exposures. Just select Enable and Shoot.

For example, I use Canon 6D, which can set multiple exposures of 2 to 9 times, and then press the shutter continuously.

It's best to find someone with a dark background.

Question 2: How to take photos with multiple exposure effects If you want to take photos with multiple exposure effects, you need to know about multiple exposure first. Details are as follows:

Multiple exposure refers to two or more exposures with different focal lengths to show the contents that are difficult to display in a photo, and is generally used to take photos with double or multiple shadows. It can be said that the multiple exposure function is the product of the film camera era. In traditional film SLR cameras, multiple exposure is a very important function and a unique photography technology. The principle of multiple exposure technology is to shoot multiple images on one film, so that an object can appear in the picture many times, and it can shoot magical effects out of nothing. This is its unique charm and attracts many people to use this technology.

Method/step skill of multiple exposure: 1. Simple multiple exposure shooting method: In the process of shooting photos, both the camera and the object remain stationary, and multiple exposure shooting of the object at different times or under different lighting conditions can make the layering of the object more prominent. This is one of the most basic multiple exposure shooting methods, which is more suitable for shooting at night. Second, the superposition method of multiple exposures We can also use the superposition method of multiple exposures to shoot. When shooting, the position of the camera can be fixed or moved. Before shooting, we should reserve positions in some areas of the picture in advance, make multiple exposures in the reserved areas, and then synthesize them together. Third, the shielding method of multiple exposures The so-called shielding multiple exposure method is to first shield half of the lens and shoot the subject once, then shield the other half of the lens and shoot the subject at different positions again, thus realizing the simultaneous exposure of the subject to a negative.

Summary: the difference between digital exposure and film exposure

1. If the film machine is used, the time interval between two exposures is unlimited, that is, after the first exposure, the second exposure can be made every hour, one day or even one or two years later. If you use a digital camera, the time for two exposures is limited, about 30 seconds.

2. Digital exposure can make people see the effect immediately and make adjustments, but the overlapping part will be less hazy. Although the film machine has no immediate effect, it makes people expect all kinds of accidents after the film is developed.

Question 3: How does Canon 600d have multiple exposures? It is theoretically feasible to use B-gate multiple exposures in 600D, with dark light and small aperture, which is self-evident. First, fix the camera on the tripod, adjust various parameters, and press the B door. Method 1: flash the subject once with a flash, and flash the subject twice ... n times by changing the position (angle). Method 2: The blackboard blocks the lens, similar to a flash. The difference between the two is that the flash mode requires the scene light to be close to all black, the lens mode is blocked, and the scene light should have a certain brightness.

Question 4: How to shoot Canon 6d multiple exposures? Shoot multiple exposures

1. Set the power switch to.

2. Press the button.

3. Under the [] tab, select [Multiple Exposure] and press.

4. The multiple exposure setting screen will appear.

5. Set [Multiple Exposure].

Select [Enable] and press.

To exit multiple exposure shooting, select [Close].

6. Set [Multiple Exposure Control].

Select the desired multiple exposure control method and press.

7. Set [Exposure Time].

Press to select the number of exposures, and then press. You can set 2 to 9 exposures.

8. Set [Continuous Multiple Exposure].

Select [1 sheet only] or [continuous], and then press.

If [65438+ 0 sheets only] is selected, multiple exposure shooting will be cancelled automatically after shooting.

If [Continuous] is selected, multiple exposure shooting will continue until the setting in step 2 is set to [Off].

9. Make the first exposure.

The captured image will be displayed.

-The icon will blink.

The remaining exposure time will be displayed in brackets [] in the viewfinder or on the screen.

Press the button to view the captured image.

10. Take subsequent exposure photos.

The captured image will be displayed on the previous image.

Using real-time display shooting, multiple exposure images merged so far will be displayed. Press the button, only the real-time display image can be displayed.

After shooting the set number of exposures, multiple exposure shooting will be cancelled. For continuous shooting, when you hold down the shutter button after shooting a set number of exposures, shooting will stop.

note:

Continuous shooting, continuous shooting speed will be significantly reduced.

During multiple exposure shooting, automatic brightness optimization, highlight tone priority, ambient light correction and color difference correction will be turned off.

The image recording quality, ISO sensitivity, photo style, high ISO sensitivity noise reduction function and color space set for the first single exposure will also be set in the subsequent exposure.

If the photo style is [Auto], the [Standard] photo style will be set for shooting.

Only the merged multiple exposure images will be saved. Images shot by multiple exposures in steps 9 and 10 will not be saved.

For multiple exposures, the more exposures, the more obvious noise, uneven color and more stripes. In addition, because the noise will increase with the increase of ISO sensitivity, it is recommended to shoot at a lower ISO sensitivity.

If [Addition] is set, it will take some time to process the image after multiple exposure shooting. (If the time is longer than usual, the inspection light will be on. )

If real-time display shooting is performed when [Addition] is set, the real-time display function will automatically stop after multiple exposure shooting.

In step 10, the brightness and noise of the multi-exposure image displayed during real-time display shooting will be different from the last recorded multi-exposure image.

If the power switch is set or the battery is replaced after setting the multiple exposure setting, the multiple exposure shooting will be cancelled.

If the shooting mode is switched to the basic shooting area mode or when shooting, the multi-exposure shooting will end.

When setting multiple exposures or shooting multiple exposures, the grayed-out function in the camera menu cannot be used.

You can press the button to view the multiple exposures taken so far or delete the last exposure.

...& gt& gt

Question 5: How to make multiple exposures in the later stage? Canon digital machine does not have the function of "multiple exposure effect simulation", so it is not easy to get it out in the later stage.

*****

The difficulty of post-simulation lies in how to make the protagonist close to 100% in the synthesized photos.

*****

A qualified photo, the protagonist in the photo should be close to 100% clear (that is, close to 100% opaque, and the protagonist's transparency is higher than the background object, so it is not the protagonist).

The visibility of multiple shadows reflecting the protagonist's dynamics cannot be too low.

*****

Use some photos in the following post to discuss the post-production of "multiple exposure effect simulation" photos.

forum.xitek/showthread.php? Thread id=865654

It is easy to make multiple shadows by superimposing photos 1, 2, 4 and 5 with layers, and the result is as shown in the left picture (the camera does not need to be stationary when shooting with a digital machine, and the camera movement problem can be solved in a few seconds when superimposing photos through a background still life later).

It will take time for the protagonist in photo 3 to appear 100% clear in the final photo, and matting is the most direct method, as shown in the right picture.

*****

Is there any better post-production method of "multiple exposure effect simulation"?

The key point is: how to make the protagonist close to 100% clarity in the composite photo!

*****

In addition, some people think that the in-machine multiple exposure effect of N family is not available in C family, but can it be easily done later? Ha ha!

Question 6: What is multiple exposure? How to achieve multiple exposures? Double exposure is relatively simple, used more, and some people use complex multiple exposure to achieve other effects. Multiple exposure is a unique skill in the film age. Due to the convenience of the late digital age, most manufacturers have removed this function in their designs.

Some of Nikon's SLR cameras have similar functions, but overlapping several photos already taken on the camera is not a real second exposure.

(The picture shows the negative scanning taken by Dongfang brand double-reverse camera. It was originally a second exposure caused by forgetting the film, but the result was an unexpected surprise. The sunset was taken with the traffic going home, and the content was quite in tune. )

Question 7: How to shoot 1 with Nikon d800 multiple exposures? After starting the machine, press the Menu button, and move the yellow bright bar in the shooting menu to Multiple Exposure through the Multiple Selector outside the upper right of the display screen, and then press.

2. Move the yellow bright bar to "Multiple Exposure Mode" and press.

3. Move the yellow bright bar to "On" and select "Series" or "Single Sheet". If you choose "Single Sheet", you can only take one photo with multiple exposures; If you select Series, you can take multiple photos with multiple exposures.

4. Multiple exposures of the camera can overlap the mirror images of two to ten lenses on one screen. According to the needs of the concept, select "the number of shots".

Please refer to the instruction manual: multiple exposure column. The first thing to buy D800 is to read through the instructions.

Question 8: How to set the multiple exposure of Nikon d7 100? Hello!

The multiple exposure settings of Nikon D7 100 are as follows:

1. The selected exposure mode must be P, S, A, M mode, and multiple exposures are not allowed in automatic mode;

2. Only the eyepiece viewfinder can be used for shooting, and the instant shooting mode cannot be used;

3. Select the menu button to display the menu, use the four-dimensional direction key to select the shooting menu tab (camera icon), select the multiple exposure option and press it to enter: select the multiple exposure mode and press it, select a multiple exposure mode (continuous shooting or once) in the lower menu, and press OK to confirm; Select and press the number of shots, select the number of shots of a single photo (2-3) in the menu below, and press OK to confirm; Then select the automatic gain compensation button, select whether exposure gain compensation is required for each exposure in the menu below, and press OK to confirm;

4. After setting, focus, compose and shoot. 5. Please refer to page 142- 145 of the manual for specific operation.

I hope my answer is helpful to you.

Question 9: How to use the multiple exposure function of Canon 5d3? The multiple exposure times of Canon 5D3 are 2 to 9 times, and there are four image superposition methods: addition, average and bright and dark. In fact, the multiple exposures of 5D3 can be divided into two types, one is the function/control priority mode, and the other is the continuous shooting priority mode. In the function/control priority mode, 5D3 will record each exposure separately, and finally merge all exposure data.

In continuous shooting priority mode, 5D3 is no longer stored separately, but the information obtained from each exposure is directly superimposed in the processor to make photos according to the final data. This is a bit close to the multiple exposures of the original film. In the first mode, each exposure can be saved as a single photo, and the photographer can also view the image during multiple exposures. The second mode, which may only have the final photos, is more suitable for rapid creation because it can't view and control the captured images during the process of continuous shooting. Function/control priority is more suitable for planned accurate shooting.

Multi-exposure control Turn the dial to select the "Multi-exposure control" option. There should be four options at this time, including "plus", "bright" and "dark". This menu selects the algorithm when synthesizing multiple exposure photos.

Addition-Select this option, and each single exposure photo will be superimposed together, just like the film age.

Average-Select this option to automatically control the exposure of the background every time a single exposure photo is taken to obtain a standard exposure result.

Bright-Select this option to keep the bright part of the multiple exposure results in the photo. For example, when shooting the moon, select this option to get a picture of Zhang Mingyue hanging high above the night scene.

Dark-This option is just the opposite of the "light" option, which can keep the dark parts in the results of multiple exposures when shooting. This is a very important option, which needs to be described in detail here: "addition" means simply superimposing multiple images like a film camera. Because there is no exposure control, the synthesized photos are brighter than those before synthesis, so it is necessary to make a simple estimation before shooting and reduce the exposure compensation appropriately, otherwise it is more likely to be overexposed. "Average" controls the brightness of photos when synthesizing, automatically compensates the number of photos taken by multiple exposures, and adjusts the synthesized photos to the appropriate exposure. Compared with more automation and intelligence. Select "addition" or "average", and you can also obtain the soft focus effect of multiple exposure shooting by changing the focus position.

The remaining "light" and "dark" are only the lighter (dark) parts of the basic image compared with the image synthesized on it, which are suitable for image synthesis that wants to emphasize the outline of the subject. It is suitable for the creation of subjects with obvious relationship between light and shade, which makes the subjects more vivid and clear. In the option of exposure times, you can set the exposure times when shooting with multiple exposures, and you can choose 2~9 exposures to shoot in 5D Markⅲ Ⅲ.

Question 10: How to make multiple exposures with PS? The method of making multiple exposures with PS is as follows:

1, open Photoshop.

2. Open the first picture to be synthesized.

3. Open the second picture.

4. Move the picture up and overlay it.

5. Adjust the position and size of the layer, and choose a mixed mode such as positive overlay.

6. Then cut it until it fits.

7. Flatten the layer again.

8. Just store it.