Traditional Culture Encyclopedia - Photography major - What should I do if the printer bracket is stuck?

What should I do if the printer bracket is stuck?

Why does HP printer always show that the bracket is stuck?

It means that the shelf for ink cartridges is stuck. Shut down, open the ink cartridge cover, move the ink cartridge truck left and right several times by hand, clean the silver-white Tietong (the ink cartridge truck moves along Tietong) and start it. I think so.

What if the printer shows that the cartridge carrier is stuck?

The printer prompts that the cartridge holder is stuck and cannot be printed. The solution is as follows:

1. There are foreign objects in the printer, so clean them up;

2. Add lubricating oil to the printer guide rail;

The pen of the printer is damaged. Please contact for after-sales replacement.

If the above methods still can't be solved, it is recommended to contact customer service and the manufacturer for handling.

HP printers always show how the bracket is stuck.

It is recommended to send it to the service center for disassembly and cleaning, especially the bearing parts of the sliding bar and bracket, or replace the bearing of the bracket with a new one and add lubricating oil.

If you handle it yourself, you can open the hatch, first clean the slide bar with alcohol cotton, then pull out the bracket and put it back, and repeatedly clean the slide bar until there is no stain on the slide bar after pulling out the bracket. Then drop 2-3 drops of sewing machine oil on the slide bar, then move the bracket left and right to fully lubricate, and then try whether it is stuck.

Extended data:

Common faults of printer

1, printer can't wrap automatically:

When the printer can't wrap lines automatically in the printing process, the printing work can't be completed, and the problem can be solved by modifying the registry.

Solution:

In the registry editor window that opens, expand the subitem "HKEY _ local _ machine \ software \ policy \ Microsoft \ Windows NT \ printer" and change the value of "PruneDownlevel" to "2". After restarting the computer, the fault disappeared.

2. Shortcomings of sparse ink and blurred handwriting in the printing process:

Solution:

This kind of fault is mostly due to the printer that has not been used for a long time or other reasons, which leads to the ink delivery system.

System failure or nozzle blockage. If the nozzle is not seriously blocked, you can directly perform the cleaning operation on the printer.

If repeated cleaning still has no effect, you can remove the ink cartridge (for printers with non-integrated ink cartridge nozzles, you need to carefully remove the nozzles) and soak the nozzles in warm water for a while. Be careful not to immerse the circuit board in water, otherwise the consequences will be unimaginable. Absorb the water droplets with absorbent paper, and then clean the nozzle several times after installation.

3. After replacing the new ink cartridge, the "Out of Ink" light on the printer panel lights up.

Under normal circumstances, when the ink runs out, the "Out of Ink" light will be on. After replacing the new ink cartridge, the "Out of Ink" light on the printer panel is still on. This kind of failure occurs. One is that the ink cartridge may not be installed, and the other is that the old ink cartridge is removed by itself and turned off for a new one.

Because after replacing the ink cartridge, the printer will fill the ink feeding system, and this process will not be carried out when it is turned off, so the printer cannot detect the reinstalled ink cartridge.

Solution: Turn on the power supply and move the print head to the ink cartridge replacement position. After installing the ink cartridge, let the printer fill the ink, and after the ink filling process, troubleshoot.

References:

Baidu encyclopedia-printer

HP Customer Support-HP Printer Failure Problem

Hello, I am glad to answer your question: How to solve the problem that the HP printer bracket is stuck? Try to push the transparent positioning lever (grille) behind the bracket up and forward. If it doesn't work, it is recommended to contact maintenance. The reasons why the HP printer bracket is stuck are: 1, and the dirty grating causes the pen holder (bracket) to move laterally and the positioning is not accurate. 2. There is something wrong with the installation of the ink cartridge. 3. Check whether there is foreign matter or paper jam at the lower end of the bracket. 4. Wear or dislocation of the penholder belt causes the penholder not to move normally. Apart from the problems of paper jam and ink cartridge installation, I can't solve them myself. Go to the pit to solve it. Printer is one of the output devices of computer, which is used to print the computer processing results on related media. There are three indicators to measure the quality of a printer: printing resolution, printing speed and noise.

What if the HP printer bracket is stuck?

The HP printer tray is stuck because:

1. The grating is dirty, which causes the pen holder (that is, the bracket) to move laterally and the positioning is not accurate.

2. There is something wrong with the installation of the ink cartridge.

3. Check whether there is foreign matter or paper jam at the lower end of the bracket.

4. Wear or dislocation of the penholder belt causes the penholder not to move normally. Apart from the problems of paper jam and ink cartridge installation, I can't solve them myself. Go to the pit to solve it.

Printer is one of the output devices of computer, which was jointly invented by John Vaught and dave Donald in 1976. Printers are mainly used to print computer processing results on related media, and are divided into laser printers, inkjet printers, impact printers and other types. Well-known printer brands include Lenovo, Hewlett-Packard, Epson and Maichuang.