Why is the computer disconnected when the broadband at home is equipped with a camera?

Cause 1: Network line failure.

Home network environment wiring:

1, a modem: a modem)-router wan port; Router LAN port-computer.

2. No modem: network cable-router wan port; Router LAN port-computer.

Reason 2: the network cable problem, it is recommended to replace the finished network cable.

Reason 3: The router is misconnected to the Internet and needs to be reconfigured.

Solution: Reset the router and reset dialing.

Reset the router method:

Method 1. There is a reset button on the back of the router. If you press it for 5 seconds, the indicator light on the router panel will go out and then light up again, which means it has been reset.

Set up router dialing:

Automatically get computer ip and dns settings.

1, open a browser-enter192.168.1(this is the address of the general router or check the login information on the back of the router), enter the route-enter the user name and password (the default is usually admin).

2. Select PPPoE dialing (some are ADSL dialing) in the setup wizard, enter your online user name and password according to the prompt steps, and save.

3. In the network parameters-WAN settings, select normal mode, and in the three options of connection, select PPPoE dial-up. The following are the options for automatically connecting, saving and quitting.

If you want to use wireless wifi, your router must have wireless routing function. In the settings, just turn on the wireless routing function. Here, the wireless signal is changed to. 1, 6, 1 1, where 1. The strongest anti-interference. You can also set a password for your wireless Internet connection.