Traditional Culture Encyclopedia - Photography major - How to adjust the autofocus camera

How to adjust the autofocus camera

How does Canon SLR autofocus?

1. Settings in automatic shooting mode. In this shooting mode, the photographer does not need to make any settings, and all autofocus points will be used for focusing; When shooting in this mode, if the subject moves during or after focusing, the artificial intelligence servo autofocus will be started, and the camera can focus the subject continuously.

2. The focusing method of Canon camera is as follows:

3, a, single autofocus: the shutter only focuses once on time. Suitable for shooting still objects.

4, B, artificial intelligence servo autofocus: the shutter keeps the focus on the subject on time. Suitable for shooting moving objects with changing focal length.

5. C. Artificial intelligence autofocus: If the stationary subject moves when the shutter is half pressed, the focusing mode can be automatically changed from single autofocus to artificial intelligence servo autofocus.

For more information on how to autofocus Canon SLR, please visit: See more details. To set the 60d autofocus, the steps are as follows:

1, focus selection, that is, there is a key marked with a four-point cross on the upper right edge of the back of the fuselage. After pressing, turn the wheel behind the camera shutter to change and select the focus.

2. As long as you hold down this key with your right thumb and keep your eyes on the viewfinder, you can quickly turn the thumbwheel according to the red luminous point in the viewfinder to change the focus selection.

3. In the real-time display shooting screen, press the auto-focus mode selection/driving mode selection button, and the icon of auto-focus mode will be displayed on the LCD monitor.

For more information on how to set autofocus in 60d, please visit: See More.

Does Hikvision 102d camera turn off autofocus?

The focus adjustment method of Haikang camera is as follows:

After the Haikang camera is installed, it is connected to the computer control software with a network cable. On the right side of the software, click the Yuntai project. After entering, there will be a camera lens icon, which is the focal length room. Click the plus or minus sign to adjust the focal length.