Traditional Culture Encyclopedia - Photography major - How does Perfect International shoot horizontally?

How does Perfect International shoot horizontally?

Be sure to forget these 20 PS skills! It will make your photos look good. Don't!

Be sure to forget these 20 PS skills! It will make your photos beautiful. Don't!

Simple pre-modification of digital photos

1 Open the picture and perform color image/saturation (-40) saturation reduction.

Create a new layer, change the layer mode to soft light, and draw the part that needs retouching with the brush tool. Here, you can use the color swatch to restore it, which is convenient for coloring.

3 The color transition of the picture is not soft enough. Please perform Gaussian blur (+85) under the filter again.

Simply processing photos is not enough.

1 Open the picture, copy the background layer, and change the mode of the background layer to color filtering.

2 Adjust the color level of the background layer.

30 seconds to get Plmm art photos

1 Open the picture and copy the background layer twice.

2. Copy the background layer 1 Apply Gaussian blur (radius 4~6), and change the mode of copying the background layer 2 to strong light.

3 Create a new layer, fill it with patterns (half gray and half white horizontal stripe patterns made and defined later), and set the blending mode to positive overlay.

Image dislocation effect

1 Open the picture, create a new layer, select View-Ruler, select Remove Tool, and drag two blue lines (9 squares) from up and down respectively.

2 Fill the squares (1, 9 dark gray, 5, 7 dark gray, 3 bright gray) with the rectangle selection tool, save them in psd format, and then close the file.

3 Perform filter-distortion-replacement and select the psd file just stored.

Note (The Displacement Filter uses the color value of the displacement map to move the selection area: white (hue value =0) is the maximum negative displacement, and the corresponding pixel of the image to be processed moves back to the upper right; Dark black (hue value =255) is the maximum positive displacement, that is, the corresponding pixel in the image is moved to the lower right; Gray (hue value = 128) does not move)

Photo shadow effect

1 Visit the picture, select-select, then edit-copy, create a new lecture, edit-paste the copied picture into a new channel]

Perform image-adjust-reverse image, return to RGB channel, edit-clear, and delete the original image.

3 Perform selection-load as selection, call a new channel, and perform editing-filling (required color).

Atomization effect

1 Open the picture, create a new layer 1, set the foreground color/background color (black/white), perform filter-rendering-cloud, and add layer mask to the layer.

2 Repeat Filter-Rendering-Clouds, Image-Adjustment-Brightness/Contrast (80,0, layer 1 mode changed to color filtering).

Character drawing effect

1 Open the picture, re-create the negative scene layer, stop the image-adjustment-communication mixer (gray, +30, +60,+10, double color), and carry out filter-stylization-edge detection to remove the pure surface with color gradient.

2 Set the blending mode to Overlay and fill opacity to 50%.

3 Add a gray adjustment layer on the background layer to adjust the output gray (0,+155) formalism.

4 Perform image-adjustment-optional color, fine-tune color (white, 0,+100,+100,-75; Yellow, 0, -40,+100, -40)

This color superposition adds a light color effect to the old photos.

1 Open the picture, copy the background layer, perform image-adjustment-color shift, and adjust the brightness/contrast (-42,+18).

2 Add the "color overlay" layer style, change the blending mode to "positive overlay", click the small color block, select the desired color (white), and then merge the visible layers.

3 Add filter aperture (brightness+100)

4 Copy the background layer, add the "color overlay" layer style again, and change the blending mode to "positive overlay" (yellow).

Add blue sky to the photo.

1 Open the picture and make a "background copy".

Create a new layer and fill it with a blue background.

3 change the blending mode to "positive overlay"

4 Copy a "background copy 2" on the layer of the background copy.

Put "background copy 2" on the top floor and add a copy to it.

6 Select the mutation tool, drag the mouse up and down, and the ground will become the selected blue.

Processing of fuzzy art photos

1. copy this layer (Ctrl+J).

2. Copy the layer with Gaussian fuzzy filter (+4.0).

3. Make color adjustment (+50,0, shit and dew ~ You are an dissatisfied woman, -64)

4. Wipe the parts that need to be understood with a fuzzy eraser.

5. It is appropriate to use layer promiscuous mode.

Create splendor in obscurity (landscape, ecology)

1 Open the picture and copy the layer.

Set the layer mode of the copied layer to Color Filter.

3 Use Gaussian Blunt (+8.6 pixels). l

4 Adjust the color image/saturation (Ctrl+U)(0,+12, 0).

Add some passivation to reduce transparency.

Add a glass effect to the photo.

1 Select the area and press CTRL+J.

Gaussian blur (+3. 1 pixel) is applied to the shear layer.

Adjust the color balance (-39, +29,+16).

4 Create a new layer. Select the thinnest area of the glass for gradient custom filling (black, white and gray tones in the order of dark, bright, dark and bright), and then press Ctrl+T to adjust the thinnest area of the glass.

5 Filter-Distorted-Glass, select the pattern you like (distortion and smoothness 1, shrinkage rate 50%).

Old photos of paper burning results-miscellaneous PS processing $

1 Open a picture and perform image-adjustment-hue/saturation (+1, -58,+1).

Image-Adjust-Change (Midtone, Deep Yellow, Deep Red, Highlight).

Copy the background layer and execute Filter-Texture-Granularity (9,56, vertical).

Create a new layer and perform Filter-Render-Cloud.

5 Perform image adjustment brightness/specific lighting (+27,+100).

With the magic wand tool, select the dark black selection in the layer 1.

7 Close the preview of the layer 1, click the copy background layer, and the distant scenery will be changed to dark brown.

8 Select-Modify-Expand (5 pictures), Select-Feather (5 pixels)

9 Edit-Fill (Foreground), select layer 1, and select black selection with magic wand.

10 Close the preview of the background layer and layer 1, select and copy the negative scene layer, and execute Edit-Clear.

1 1 Image-The size, height/width of the canvas are all increased by one centimeter, positioning (middle).

12 Open the background layer preview, select the background layer and fill the foreground (light brown).

13 choose to copy the negative scene layer to realize layer-layer style-projection. (Top lamination, opacity 45%, angle 45, interval 7, extension 2%, size 10).

14 Merge all layers.

Another method for make artistic photo frame with mottled effect

1 Create a new file, press D and fill the background with white.

Cross, Filter-Rendering-Clouds.

3 CTRL+M adjusts the lower curve (strong black-and-white contrast).

After the good effect is completed, the filter-distortion-glass (distortion 7, smoothness 3, texture-painting, shrinkage 50%) is handed in.

Create a new dark black layer as the background, and then create a new white rectangular layer.

7 Filter-distort-replace the layer where the rectangle is located, and select the acquiescence option. Then find the PSD white film just saved and replace it.

PS renders the atmosphere (scenery) of your photos.

1 image-adjustment-grayscale (RGB +29, 1.0, +234). change colour

Execute the hue/drum harmony command (Qitu-14, +4 1,-1).

Hue/saturation (red, hue value decreases, saturation increases) is performed continuously.

4 Continue to implement hue/drum harmony (yellow, -22, +45,-1).

5 Continue hue/saturation (green,+15,0,0).

6 Adjust brightness/contrast (brightness increase/contrast increase). Color difference (

Finish the sketch result simply and nervously.

1 Open the picture, apply the color, and adjust the brightness/specific illumination (brightness decreases/contrast increases).

2 copy the background layer (Ctrl+J), select the background layer, perform filter style-edge detection, and then UXXXXX passivation, and then

The layer mode is changed to overlay.

Build a new floor, dig and fill it in red, add positive color, and the sense of re-entry is blurred. Change the layer mode to positive overlay.

Wipe the highlights with the eraser tool (change the opacity to 15%).

Painting system with brush stroke sketch effect

1 Open a picture, copy the background layer, and select the copy layer 1 to filter-blur-Gaussian blur (2.0 pixels).

2 Copy the background layer again, select Copy Layer 2, execute Filter-Sketch-Watercolor Pen (20, 60, 80), and set the promiscuous mode of the layer to dim.

3 Copy the background layer again, select Copy Layer 3, set the foreground color to red, execute Filter-Sketch-Paper Strip (25,7, 10), and set the opacity to 30%.

4 Copy the background layer again, select Copy Layer 4, set the foreground color to dark black and the foreground color/background color to black/white, filter-color map-copy (1 50), adjust the color level (RGB,157,0, 159), and recharge the cutout.

Take special photos with simple measures.

1 Open a picture.

Select the blue channel in the channel, then perform filter-stylization-exposure in the blue channel, and click to return to the RGB channel.

Wu Ke Dibang Xiao Shu

1. Create a new file, size 500X300, RGB mode, Zhuxian 2 Private Server Announcement Network, white background.

2. Use the text input tool to randomly input several codes of 0 1, press CTRL+T to rotate vertically and put them in the past, and make several copies of different sizes, and put a few randomly. Another measure is to use filters, which can also achieve very good results. Menu-Filter-Texture-Texture, adjust the intensity and contrast to 100, and select the vertical texture type.

3. Merge the text layer and background layer with the code of 0 1, and set the foreground color to be green and the background color to be black around R: 100, G: 255 and B: 0.

4. The effect of choosing double-filter neon lamp is that the light receiving size is set to 10 and the light receiving brightness is 15.

5. Select menu-Filter-Blackout-Illuminate the edges, and set the width of the left and right edges to 1, the brightness to 20, and the smoothness to 1.

6. Select menu-Image-Adjust-Brightness/Contrast, adjust the brightness to-10, and adjust the contrast to about 60.

Ps "Reverse Negative Influence" Portrait Processing Example

"Reverse negative influence" is a special technique in film shooting. It is to use the agronomy of negative films to develop reverse films, which will lose strange and interesting colors. If used in MM selfie photos, it will be filled with an avant-garde and even decadent color.

1 Opens the image and displays "Tunnel Inner Panel" on the right.

2 Select the blue channel in the channel control panel, enter the image menu, select the application image, and then select Invert. For mixed mode, use "positive overlay" and the opacity is 50%. Confirm.

3 Select the green channel in the channel control panel, enter the image menu, select the application image, and then select Invert. The blending mode is "positive overlay" and the opacity is 20%. Confirm.

Select the white channel in the channel control panel, enter the "Image" menu, select "Application Image", New Zhu Xian 2 official website, and confirm with "Color Deepening" in the mixed mode.

5 Select the blue channel on the channel control panel, enter the "Image"-"Adjustment" menu, select "Color Scale" (or call it up directly with the shortcut key "CTRL+L"), and enter 25,0.75, 150 in the "Input Color Scale" column to confirm.

6 Select the green channel in the channel control panel, enter the "Image"-"Adjustment" menu, select "Color Scale" (or use the shortcut key "CTRL+L" to bring it up), and enter 40, 1.20, 220 in the "Enter Color Scale" column to confirm.

7 Select the red channel in the channel control panel, enter the "Image"-"Adjustment" menu, select "Color Scale" (or use the shortcut key "CTRL+L" to call it up directly), enter 50,1.30,255 in the "Enter Color Scale" column, and confirm.

8 Select all RGB channels in the channel control panel, enter the "Image"-"Adjustment" menu, select "Brightness/Contrast" to adjust the brightness of illuminance -5, and release the screen with contrast of +20. Confirm.

9 Select all RGB channels in the channel control panel, enter the "Image"-"Adjustment" menu, select "Hue/Saturation" (which may be called up directly by the shortcut key "CTRL+U"), adjust the saturation+15, and confirm.

This post is from Zhongguancun Online Digital Photography Forum:

This course introduces the color matching method of pink exterior photos. He is God ~ ~ ~ ~ ~ ~, Baguio. Rough color matching process: first adjust the basic color with the color matching tool, and then gradually strengthen the parts that need to be highlighted. If you think there are many colors, you can add some complementary colors.

1, open the original material, create an optional color adjustment layer, under the parameter setting:

Red: 23 -22 38 -4 1

Yellow: 0 0 -26 0

2. Create a new layer, fill it with color #450D7D, change the blending mode of the layer to Brighten, and change the opacity of the layer to 50%.

3. Create a new layer, fill it with color #02 1D60, change the layer blending mode to Cancel, and change the layer opacity to 30%.

4. Create a new layer and press Ctrl+Alt+Shift+E to print the layer. Execute: filter >; Fuzzy >; Gaussian blur with a value of 5. After confirmation, change the layer blending mode to Soft Light.

5. Create an optional color adjustment layer (white: -37 4 9 0). After confirmation, wipe it on the background and human skin with a black brush.

6. Copy the next layer and change the opacity of the layer to 30%.

7. Create a curve adjustment layer, a little brighter.

8. Create a new layer and print it out. Wear off the skin of your own things properly, and choose the lightening tool to draw the highlights of your face.

9. Create a curve adjustment layer, and then create a brightness/contrast adjustment layer (upper left and lower right) after judging the blue adjustment (0 6).

10. The new layer fill color is #02 1D60, the layer blending mode is changed to Cancel, and the layer opacity is changed to 10%.

1 1. Press Ctrl+Alt+~ to bring up the highlighted selection, create a new layer and fill it with white, and change the opacity of the layer to 5%.

12. Tick off the lip part with a pen, feather it properly, and create a color balance adjustment layer, which is slightly lighter.

1 3, create brightness/contrast brightness adjustment layer (0 3)

14. Create a curve adjustment layer (blue box in the lower right corner).

15, create hue/drum and degree adjustment layer (0 -5 0)

16. Create a new layer and stamp. The layer blending mode is changed to "color filter" and the layer opacity is changed to: 30%. In addition, only the bottom layer is kept, and other parts are erased with a black brush.

Finally, adjust the overall color to complete the final result.

1. Open the picture, drag it into the ground material, set the opacity to 20%, and use the version to dissolve the picture (this step can save the details, but you must add a lot of empty days).

2. Create a new layer, cover it, perform the operation of the channel mixer, and set the blue channel value to 0,0,85.

3. Perform hue/saturation operation and increase the saturation value to-15.

4. If the rendering is found to be gray, perform brightness/contrast operation.

Brightness: -8 Contrast: 5

5. Create a new layer, fill it with white, overlay the layer mode, and set the opacity to 30%.

6. Copy the white layer and change its layer mode to soft light with opacity of 20%.

7. Create a new layer, set the foreground color to white, use the gradient from foreground color to transparency, and push the gradient obliquely to the characters from ground to ground.

8. Create a new layer, the seal layer, and perform the image application operation. The data is set as follows.

Channel: red mixed color: true color mixed opacity: 8%

9. Improve the grade of the result map and stop the color scale adjustment again.

Input color scale: 29 1.32 255

10. Finish the farm work in black and white.

The original course introduced a rare method of making color gradient pictures. The process is simple, just create a new layer and push the color mutation, and then adjust the layer blending mode and the opacity of the layer. However, in order to achieve this effect, we need to add some decorative elements, such as starlight and some dream decorative brushes. Personal parts also need simple white polished skin.

Topaz filters and some commonly used brushes can be downloaded from www.68ps.com or searched by Baidu. Men can love them several times ~! ! ! .

1, form good habits. Copy a layer (ctrl+J), and then filter the copied layer. Topaz filter is used for the original Brix, and the setting parameters are as follows: sharpness: 2. 10, range: 1, corner embrittlement: 2.23, and noise reduction: 1.57.

2. Select a rubber, and then add a mask to the current layer. Mask processing: Just wipe the place where the filter is not needed with a rubber, and the desired effect can be achieved. Here, people only make small changes to the company to prevent the influence of too few filters on their faces.

3. Add color balance adjustment layers (-30, 26, 37)

4. Add a rainbow gradient, the transparency is 75%, and the mode is set to soft light (what is this rainbow gradient? It is a gradient composed of seven colors, and the system gives one in the gradient. If the color is not satisfactory, you can create a new one yourself. If it is not new, please leave it. )

5. Finally, embellishment. You can brush casually with your favorite brush. The key is to have the feeling of dreams, which requires blurring. Create a new layer and use a brush to Gaussian blur this layer.

1, open the material of this picture, copy the background layer, and properly grind the characters (there are thousands of ways to grind the skin, so it is no longer fine. There are a lot of image processing software on the Internet, and it's good for Nikon to bring that. Novices admire Xiu Xiu, light and shadow, etc. , you can quickly process the skin, and then enter PHOTOSHOP for regional processing. )

2. Create a curve adjustment layer and adjust white and blue (red is slightly brighter and blue is slightly brighter. The simple way is that the red curve just goes up and blue just goes down).

3. Press Ctrl+Alt+~ to bring up the highlight selection, press Ctrl+Shift+I to reverse the selection, and then create a curve adjustment layer. For blue check adjustment (input: 23 1 output: 249), you have to move the curve to move forward. If you don't understand, the right end is in the upper part and the right end is in the lower part.

4. Create a new layer, use the sudden change from white to transparent to deduce the radial gradient, and then change the layer filling to 3 1%.

5. Create a new layer, or use a white gradient. The position is in the upper right corner of the screen, which is the direction of people coming and going. Layer fill changed to: 78%.

6. Create an optional color adjustment layer, and choose dark black. The numerical value is: yellow: -5/ white: -6/ yellow: +7.

7. Create a color balance adjustment layer, select highlights, yellow value: -5, red value: +5, and finish the final effect after judgment.

1. First, open the original image, build a membrane for the skin and some yoga defects, and make a gradient map mediation layer. The color setting is shown in the figure. This color system is self-contained. The principle was mentioned in the last tutorial, so I won't go into details here. The transparency of color mixing is 27%. Next, make a color balance mediation layer with a middle tone of 0/+4/-20/. Do this 2 well.

2. After completing the above two steps, you can choose to merge layers or split layers. When I did this tutorial, I divided it into convenient screenshots to merge all the layers. People constantly create new vacant layers, acquiesce in the foreground scenery, and set gradient tools as shown in the figure. Pull the gradient in the empty layer and the blending mode becomes dark. Opacity depends on your gradient. The purpose of this step is to darken the corner and then adjust the color scale: 5/65438.

3. Merge, copy the background, adjust the color balance, and adjust the two ends:-19/+ 16/0. In order to keep the details, people continue to change the blending mode to color, and adjust the curve as shown in the figure (186.200/67.56), changing the opacity to 60%, resulting in a copy of the currency background.

1. Open the original material, press Ctrl+J to copy the background layer, press Ctrl+M to adjust the curve, and select "Automatic".

2. Copy the future layer, change the layer blending mode to "color filter" and change the layer opacity to: 58%. Add layer mask, and use a soft angle black brush to erase some over-bright parts. The purpose of this operation is to make the layer brighter.

3. Create a new layer, fill it with color #0d0537, and change the layer blending mode to "Cancel".

4. The new layer fill color is #fffce7, and the layer blending mode is changed to "positive overlay".

5. select menu: layer > new adjustment layer > colors to choose from, and the parameter settings are as follows (please select "right" for all measures):

White: -37 24 100 37

Yellow: -68 5 3 1-100

Green:100-1005100

Painted red: 6 0 1 100

Red: 100-18 20 0

Neutral color: 26 8 -6 1 1

6. select the menu again: layer > new adjustment layer > color can be selected, and the parameter settings are as follows (I forget it must be right):

Yellow: 25 13 -37 23

Green:-1000-100100

7. select the menu: layer > new adjustment layer > color balance, and the parameter settings are as follows:

Disyllabic:-11118

Check "Keep brightness"

8. select menu: layer > new adjustment layer > brightness/specific lighting (-13 9)

9. Build a new floor, fill it with dark black, and wipe both ends with a large eraser (darken the corners).

10, if you want to add text, you can add text, merge all layers, filter-sharpen -usm sharpen, numerical acquiescence. That's it. You don't have to grind if you don't like it. Very short PS color matching tutorial, mainly for PS.

1, next to this picture, choose? Image mode? Laboratory color

2. Enter the channel In the laboratory mode, select channel A (what do you mean by selecting channel A? Many novices don't understand this answer, which leads to the wrong layer selection. The so-called selection of channel A means that you have to click the layer of that channel with the left mouse button to make that channel become the working channel in the future), then hold down ctrl and click on channel A to load it as a selection.

3. Select the opposite direction (Ctrl+shift+I), then copy (Ctrl+C), select channel B, press and hold the left mouse button of Ctrl, click on channel B to load it as a selection, and then paste (Ctrl+V) image mode to return to RGB color.

4.image? Application image? Channel (blue)? Blend (lighten)

5.image? Adjust? Photo filter? Dark yellow? Concentration? 15 ? Maintain lightness and complete color matching.

1. Open the picture and copy the background layer.

Adjust the curve brightness (automatic control), hue/saturation (+12, specifically, I control the function compiled by C compiler in C++ program, why ... because there is an identical diagram, which is enough to achieve gorgeous effect).

2. Change the picture mode to the laboratory mode (no stitching is needed). Image? Apply the image (one pass, soft light, 60%), and then switch the image mode back to RGB.

Finally, slightly adjust the color and other parameters of the picture to make it more harmonious! (You can adjust if you are satisfied), and the merger is complete!

1. Open the original material and create an optional color adjustment layer. The parameter settings are as follows:

Red: -2-1 1 28 0

Yellow: 0-10 9 0

Green: 91-18-100 29

Red:-19 -22 4 0

2. Create an optional color adjustment layer with the following parameters:

Green: 100 35 -30 0

Yellow: -7 0 49 0

3. Establish a curve adjustment layer and lighten it. Let the curve bend back slightly, otherwise it will form exposure force. )

4. Create a new layer, fill it with color #5729CE, change the layer blending mode to "soft light", and change the layer opacity to 40%.

5. Press Ctrl+Alt+~ to bring up the highlighted selection and create a new layer filled with white.

6. create a new layer, press Ctrl+Alt+Shift+E to print the layer, and execute: Filter >;; Fuzzy > Gaussian fuzzy, the value is 5. After confirmation, change the layer blending mode to "Soft Light" and the layer opacity to 60%.

7. Create a curve adjustment layer and adjust the blue color (input: 230, output: 255).

8. Create a new layer and press Ctrl+Alt+Shift+E to seal the layer. Execute: filter >; Fuzzy >; Gaussian blur with a value of 5. After judgment, change the layer blending mode to "positive overlay" and the layer opacity to 20%.

9. Create a new layer and stamp. Deepen the corners with the deepening tool, and then sharpen them properly.

1, open your meat.

2. Copy the background layer twice, and the layer becomes colored (ctrl+shift+u).

3. The mode of layer 2 is color filter, and the low transparency is 60.

4. A new color balance is added to the second layer. The color scale value is 0 2 1 0, and it is divided into two layers (ctrl+G).

5. Add a variegated color, and the r value is: 67 G:44 B:0. The mode is strong light and the transparency is 50.

6. It's over. Is it simple? (obligatory editor: administrator)