Traditional Culture Encyclopedia - Photography major - Poster shows how to install tripod. How to assemble the wedding poster frame

Poster shows how to install tripod. How to assemble the wedding poster frame

How to install the tripod for art supplies and where to put the drawing board? Installation steps of tripod and drawing board for art supplies:

1. Open the packing bag and take out all the parts. Two parts, one is a folded bracket and the other is a thin steel bar. The bracket is retractable, and the steel plate is attached under the bracket.

2. Stretch the three "legs" of the bracket. In this step, it should be noted that to open the plastic bayonet, each small bracket has two bayonets, and the two plastic bayonets are opened separately and stretched outward until they can no longer be stretched. All three legs should be stretched out. 3. Place fine steel bars. 4. Stretch the "bracket head" to the height required for fixing the painting. There is a plastic buckle in the middle of the bracket. It can be pulled upward when opening the buckle, and can be fixed when closing the buckle, so that the "bracket head" will not slide down. 5. Adjust the angle of the bracket to increase stability. Only the three "legs" of the bracket touch the ground, so the positions of the legs of the bracket and the holes of the thin steel bars can be adjusted to increase stability. How to assemble the wedding poster frame tool: X-frame, wedding poster 1, and take out the bracket that needs to be installed on the bag. 2. Remove the bracket, spread the bottom two feet and put them on the ground. 3. Insert the other two poles into the holes in the four corners of the wedding poster. Then, take out the wedding poster as a display box at this time. 5. From top to bottom, the four corners of the picture are fixed on the small hooks on each leg of the bracket in turn. 6. Then, after plugging it in, adjust it to the appropriate position as required, and then straighten the X bracket to complete the operation. How to install a tripod When installing a tripod, you need to stand it vertically on the ground, unfold the three foot tubes below to ensure that the three feet are fully extended and stable, open the plate buckle on the foot tube, adjust it to the required height, and then fix the plate buckle. A tripod is a kind of bracket used to stabilize a camera to achieve a certain photographic effect. The positioning of tripod is very important. Tripods can be classified into wood, high-strength plastic, aluminum alloy, steel, volcanic rock, carbon fiber and so on.