Traditional Culture Encyclopedia - Photography major - How does Canon 500D capture the street corner at night?

How does Canon 500D capture the street corner at night?

The way Canon 500D captures a street corner at night is as follows: Skillful use of ISO sensitivity and selection of white balance are very important in capturing street corners at night. I happened to see the beautiful scenery by the roadside. The orange light source was not compensated when shooting, and the color tone seen in front of us was truly reproduced. In addition, in order to avoid hand shake when shooting with a hand-held camera, a lens with hand shake compensation mechanism (IS) is used while improving the ISO sensitivity of the camera. Shooting data camera: Canon 500D lens: ef-s 1 8-55mm f/F3.5-5.6IS/program automatic exposure (f3.5, 1/30s) /ISO 1600/ white balance: Daylight Canon 500D shooting steps:/. Because the automatic exposure mode of the program can be judged according to the surrounding brightness, the appropriate exposure value can be automatically selected, which is also very convenient in night photography. If it is the first time to challenge night shooting, I suggest you try this mode first. 2. You can set the ISO sensitivity at will to prevent hand jitter. When shooting with a hand-held camera, you should pay attention to the hand jitter caused by the low-speed shutter. Although the lens equipped with hand shake compensation mechanism (IS) is used, in order to ensure the shooting quality, the shutter speed should be as high as possible. ISO sensitivity can be continuously improved according to the brightness of the shooting scene until the appropriate shutter speed is obtained. Here, the shutter speed is assumed to be 1/30 seconds, so the ISO sensitivity is set to ISO 1600. 3. Set the white balance to ldquo daylight rdquo In order to highlight the atmosphere, although it is more convenient to use automatic white balance in many scenes during the day, it is sometimes felt that using automatic white balance is not enough to highlight the atmosphere when shooting night scenes. At this time, you can try to choose ldquo daylight rdquo, such as preset white balance, and consciously make the image color cast to get better results. 4. Press the shutter button in a stable posture to set the camera parameters, then naturally tighten your arms to fix the upper body, and then press the shutter button stably. Be careful not to press it suddenly with your fingertips, but to press it hard with your fingertips to avoid bringing too much jitter to the camera. Advanced shooting skills: nbsp find a place where you can be a tripod. Sometimes, even if the above settings are made, there will still be cases where the necessary shutter speed cannot be reached and there will be obvious hand jitter. At this point, you can safely release the shutter with the help of walls and other places where you can put the camera. But after the camera is placed on other objects, it is not easy to change the up and down angle. So you can fold a small handkerchief under the camera to adjust the shooting angle. Choosing the right shutter speed according to the special conditions of night scene is a key to shooting night scene with hand-held camera, which is the choice of shutter speed. Generally speaking, in the 35mm specification, the focal length of ldquo is one second, and rdquo is the lowest speed to prevent hand jitter. However, because night scenes are mostly composed of point light sources, the jitter will be more obvious, so it is recommended to shoot with a shutter speed one level faster than usual. Let's take a look at how to judge the appropriate shutter speed. For example, when EOS 500D is used with EF-S18-55 mm f/3.5-5.6 IS (35 mm equivalent focal length is 29-88mm) lens, and the maximum shooting range is achieved with 18mm (equivalent to 29mm) focal length, the shutter speed should be set to ldquo according to the above method. 1/29 rdquo; That is, ldquo 1/30 seconds rdquo shutter speed is safe up and down. In addition, a lens equipped with a hand shake compensation mechanism (IS) can also be actively used. According to different lenses, the compensation effect will be different. This time, a lens with compensation effect equivalent to about 4 shutter speeds is used to effectively prevent hand jitter.