Traditional Culture Encyclopedia - Photography major - How to use Gaussian fuzzy grinding?

How to use Gaussian fuzzy grinding?

How to use Gaussian fuzzy grinding in PS

Skin dressing method 1: 1. Observe the channel panel, select a relatively good channel, and further treat the skin with tools such as repair/stamping/rubber. 2. Choose another passage, circle the places that don't need to be treated with lasso tools, and feather appropriately. After eclosion, reverse selection is carried out. 3. Go to the Layers panel and copy the background layer. 4. Select the background layer, go to the channel panel, and copy the content of the processed relatively good channel to other channels through selection. 5. Go to the Layers panel, perform Gaussian blur on the copied layer, and set the layer property to "Color". 6. Processing is completed. Skin changing method 2: 1, observe the channel panel, select a relatively good channel, hold down the left key of CTRL and click the channel; Then, hold down CTRL+SHIFT and left-click the RGB channel. 2. Go to the Layers panel, copy the contents of the selected area by one layer, and perform Gaussian blur. 3. Copy the background layer, put it on it, and add the template. 4. Set the foreground color/background color to black/white, select the brush tool, set the "opacity", and apply the skin with the brush tool for further processing. 5. Processing is completed. Skin trimming method 3: 1. Open the picture and perform Gaussian blur. 2. Go to the history panel, set the step size of Gaussian blur as the brush source of history, and restore the history to an open picture. 3. Select "History Brush Tool" and set "Opacity" to smear the skin until you are satisfied. 4. Processing is completed. fr=qrl3

Who can tell me how to grind Gaussian blur? beg ...

1. Open the original material, copy the background layer by layer, and then copy: filter >; Fuzzy >; Gaussian blur, the value is 3. After confirmation, hold down the Alt key and press the Mask button below the layer panel to add a mask to the layer, as shown in figure 1. At this time, you will find that there is no change in the picture, and the blurred picture just now is gone. This is the purpose of holding down Alt (directly filling the mask with black).

2. Then choose a white brush. The brush needs to choose a soft edge with a transparency of about 50%, as shown in Figure 2, and then polish the skin of the character where the face, skin and clothes are mottled. This peeling method is my original creation, which has been used in previous tutorials. I will explain it in detail this time. Don't smear the outline of the character when drawing, so as not to affect the structure of the character. Other ambiguities will be discussed later. After polishing, there will be colored blocks in some places, and the leather will be polished later, in the same way, but the fuzzy value will be larger. This method of skinning is very natural and quick, and using skinning software will destroy the outline of the character in many cases. Next time I'm going to write a separate tutorial to introduce this peeling method.

3. create a new layer, press Ctrl+Alt+Shift+E to stamp the layer, and execute: Filter >;; Fuzzy >; Gaussian blur, the numerical value is about 12, then hold down the Alt key and add layer mask, and then use a white brush with the transparency of about 10% to smear color blocks on the face, and the peeling part is basically completed. Now the spots and color blocks on the face of the characters are basically eliminated, and the characters have no sense of distortion. Whitening again below.

4. Create a curve adjustment layer and simply adjust the color. The adjustment range of the curve is very small. Watch the handle. The parameter setting is shown in Figure 5-8, and the effect is shown in Figure 9.

5. Create a new layer and press Ctrl+Alt+~ to bring up the highlighted selection and fill it with white. The opacity of the layer is 80%. The effect is as shown in figure 10. The photo is much whiter, but the original image is blurred. However, there is almost no noise on the face after whitening, which proves that the previous peeling method is very fine.

6. Create a new layer, seal layer, select the smudge tool, and then select a brush with more spots, as shown below. This brush comes with PS. If it cannot be found, you can choose to reset the brush. Transparency: 0%. Start applying hair and apply it along the hair. The effect is shown in figure 12.

7. This step deals with people's five senses. Create a new layer, punch the layer, slightly enlarge the left eye, draw the outline of the eye with the pen tool, deepen the inner edge with the deepening tool after the selection, and deepen the eyes at the same time, and then highlight the reflective part of the eye with the lightening tool. Processing needs to be careful, and other parts are treated in this way. The effect is shown in figure 14. After the facial features are restored, people immediately become clear.

8. Choose a lightening tool with a transparency of about 10% to brighten the place with the reflection on the face of the person. The effect is shown in figure 15.

9. Sharpen the picture properly (filter >; Sharpen > USM sharpening), the value is customized.

10. Create a new layer, poke the layer, press Ctrl+Shift+U to remove the color, then change the layer blending mode to "Color Fade", hold down the Alt key and add layer mask to paint the reflective part of the hair with a white brush to enhance the texture of the hair.

1 1. Create a curve adjustment layer and adjust green and blue. The parameter settings are shown in Figure 18 and Figure 19, and the effect is shown in Figure 20.

12. Create a curve adjustment layer. The parameter setting is shown in Figure 2 1, and the effect is shown in Figure 22. At this point, the restoration of the characters is basically completed, a new layer is built and stamped, and then the characters are checked out. The method of checking pictures is customized.

......& gt& gt

How to use Gaussian fuzzy grinding in ps

Open the picture-copy a layer-filter Gaussian blur-erase the five senses and facial contours. Re-toning therapy. That's it.

How ps Brush Skinning Details with Gauss Fuzzy Mask

Open the picture, copy a layer, filter-blur-Gaussian blur, and adjust the value as needed to make the face smooth. Hold down the ALT key, click the layer mask button at the bottom of the layer panel, add a black layer mask to the layer (if the mask added directly without pressing the ALT key is white), and then use a white brush to smear where the skin is needed, and the smeared place will be smoothed.

Why do people use Gaussian blur instead of surface blur when grinding characters? 20 points

This is the basic process of character dermabrasion. If the face is ok, the blur value can be reduced a little. Although you can't see anything after covering it with a mask, you will see that the place you daubed will be blurred by a white brush. (You don't need a mask where you don't need it, so you need to add a mask. If not, you can apply again. If you don't need it, it will remain the same. This will blur the acne on your face, make your skin better, and then you can recolor it.

Do more and you'll understand. That's how I got here.

PS principle of Gaussian fuzzy dermabrasion

-Gaussian blurred image pixels will be averaged. Mask interpolation is to remove some places that don't need Gaussian blur, so that the characters can't see clearly. .

Why can't ps Gaussian blur be eliminated by adding mask polishing?

The reason is that the first possibility is that the color selection is incorrect, and black should be chosen for daubing. Second, it may be that the tools are wrong, so you should brush them with a brush. The third possibility is that the brush flow is wrong, which can't be 0%. Fourth, it is possible that the selection of layers is incorrect, and it is necessary to choose a mask to apply. Fifth, the layers may be in the wrong order. You have a layer on the mask layer, and it is covered. You didn't see it.

How to use Gaussian blur in PS

I'm not very good at it either, but it's clear here ~ woniuhd/html/photoshopjiaocheng/20070827/206.

I feel that you shouldn't ask this question here ~

What is the meaning of dermabrasion in ps, and what is the specific function of Gaussian blur? Why does it look like nothing has changed after I use Gaussian blur?

Face lift is to smooth the skin and remove spots and wrinkles. Gaussian blur is usually 3 to 10 pixels ... I'll tell you the steps. Copy a layer. After the new layer is blurred, you should be able to see the difference. Then press alt and click the mask button at the bottom of the layer module, add a transparent mask, and then erase it with an eraser.

How to wipe after PS Gaussian blur

There is a layer mask at the bottom of the layer panel, and a white mask will appear behind the layer. Use the brush tool to smear whether the foreground color is black or restore the foreground color is white, and restore the Gaussian effect.