What if Huawei's mobile phone gets water?

1. Take Huawei's mobile phone out of the water as soon as possible, and turn it off immediately.

This is very important. No matter whether the mobile phone still responds, please turn it off quickly to prevent the motherboard from burning out due to short circuit. If the phone doesn't respond, please keep pressing the power button and the volume up button until the phone restarts and enters recovery mode, and then choose to turn off the phone.

2. Take out the SIM card holder, the mobile phone case and other items, and wipe off the water outside the fuselage and gaps with paper towels or cloth.

Dry the SIM card as soon as possible after taking it out. Pay attention to the earphone and power interface, and you can plug it with a small cotton swab or paper towel to dry it.

3. Blow dry your mobile phone with a hair dryer.

Use a hair dryer to blow cold air all the way to the earphone hole and card slot of the mobile phone. Pay attention to using cold air, and never use hot air.

4. If it's a little rough, it should be enough to blow it with a hair dryer for about half an hour. It shouldn't be a problem to wait for a few days on the windowsill before turning it on.

Caution: Do not put it in a hot environment or blow it with a hot air drum, as this will damage internal components. Wait until there is no fog. It is best to leave it for half a day and take it out to naturally return to room temperature. Please note that this method is only suitable for machines with slight water inflow. Do not try the water soaking machine.

5. The mobile phone is seriously flooded. Water mist can already be seen around the camera, and there is a watermark on the screen of the mobile phone. In this case, be careful not to open it. You must find a mobile phone repair shop to disassemble the machine at once. When disassembling, be sure to disassemble all important parts such as the motherboard, screen, tail plug and camera.

You need to pay special attention to the water in your mobile phone:

1. If the phone doesn't respond, don't try to press the power button to turn it on or charge it. Once the equipment works, it is easy to have a short circuit, resulting in damage to the motherboard.

2. Don't blow with the hot air of the hair dryer or expose to the sun, which will lead to short circuit or burn out the circuit board.

3. If the water is serious, it is best to disconnect the mobile phone and turn it off if possible.

4. If the above steps can't solve the problem, don't try to open it easily. Please consult a professional mobile phone repair shop for disassembly inspection.

Can the mobile phone be repaired when it is flooded?

Generally, mobile phones can be repaired with water. Just follow the above steps, disassemble it at the maintenance point and deal with it first. Generally, for mobile phones that have not been flooded for a long time, they should be sent to a repair shop to disassemble the corroded parts and replace the damaged parts.