Camera monitoring installation steps

The installation process of the camera is actually not complicated. As long as you follow the following steps, you can easily install and configure the camera.

Lock the monitoring target

First of all, make sure which area you want the camera to guard, so as to find the most suitable location.

Choose the right camera

Choose indoor, outdoor, fixed or pan-tilt cameras as needed, and don't forget to check their characteristics and functions.

Set up a stand to put the camera.

Choose a suitable bracket to ensure that it can hold your camera firmly and make it stand straight.

Connect the camera to the power supply.

Make sure the camera has enough energy to keep it awake at all times.

Connect to the Internet and walk!

If you want to watch or record video remotely, remember to connect the camera to a router or switch. In this way, it can communicate with other devices smoothly.

Adjust the angle and lock the target.

According to the actual needs, fine-tune the angle and direction of the camera, so that it can better protect your territory.

Configuration settings, everything is under control.

Refer to the instruction manual, and set the video quality, recording time, motion detection and other functions for the camera. Everything is under your control.

Test, test again!

After making sure everything is set up, you must test it, so as to ensure that everything is normal and protect your own safety.