Traditional Culture Encyclopedia - Photography major - How to install and use surveillance cameras

How to install and use surveillance cameras

Install surveillance cameras:

1) Its installation height: the indoor floor should not be less than 2.5m; under the condition of meeting the visual field requirements of the monitoring target; Outdoor ground clearance should not be less than 3.5m

2) Monitoring camera and its supporting devices, such as lens, protective cover, bracket, wiper, etc. , should be installed firmly, flexible operation, and should prevent damage, in harmony with the surrounding environment.

3) In the environment of strong electromagnetic interference, the installation of monitoring cameras should be insulated from the ground.

4) The signal wire and the power wire are introduced separately, and the exposed part is protected by a hose, which does not affect the rotation of the pan/tilt.

5) The monitoring camera in the elevator car should be installed on the left or right side above the car door, and can effectively monitor the facial features of passengers in the elevator car.

Monitoring camera control equipment installation:

1) The installation position of the console and cabinet (frame) should meet the design requirements, and the installation should be stable and firm, which is convenient for operation and maintenance. The clear distance between the back and side of the cabinet frame and the wall shall meet the maintenance requirements.

2) The installation of all terminal equipment such as control, display and recording of surveillance cameras shall be smooth and easy to operate. Among them, the display (screen) should avoid direct external light, and when it is inevitable, measures should be taken to avoid light. The equipment installed in the console and cabinet (frame) should have ventilation and heat dissipation measures, and the internal connectors should be firmly connected with the equipment.

3) All cables in the control room shall be provided with cable troughs and inlet holes according to the installation position of the equipment. The cable troughs and inlet holes shall be arranged neatly, bundled neatly, numbered and permanently marked.