Traditional Culture Encyclopedia - Photography major - How to chop off the heads of two little people?

How to chop off the heads of two little people?

How to chop off the heads of two little people?

1. Fold this paper into a triangle along the diagonal.

2. Fold it twice again.

3. Draw a semi-villain on the right angle side of the triangle with a pen.

4. Cut out the shapes of the drawn characters, and don't cut off the arms, just open them.

Precautions for paper cutting:

1, the main tool needed for paper-cutting is scissors, so you must pay attention to safety when holding paper-cutting.

2. Paper-cutting needs patience and understanding. We need to observe more and find a way to figure it out slowly. Do it often to find the feeling. When cutting, the hollowed out should be hollowed out. You can't cut the thread.

3. The tools and materials used in paper-cutting will have certain limitations. Therefore, when dealing with graphics, paper-cutting should not only grasp the main features of objects, but also connect lines with nature. In this way, we need to boldly abandon some minor parts to make the main body more obvious.

The method of paper-cutting:

1. Cut straight lines: Cutting straight lines is the most basic skill of paper-cutting, which requires smooth cutting, no burr and a sense of pause. The reason for burr is that the scissors blade is too blunt or there are too many layers of paper. The first solution is to change tools; The second is to grind scissors by hand; The third is to reduce the number of layers of paper.

2. Sawtooth scissors: cut first, and the scissors are cut obliquely from one side to another; The second cut starts from the starting point of the first cut and falls obliquely on the opposite point of the first cut. The first and second cuts have the same length and different directions. The fourth cut repeats the first and second cuts, and so on, so that the remaining part becomes a "W" shape.

Pay attention to the strength and depth of the third cut, not only the second cut, but also not too much. It's ugly to cut it in an "X" shape. If you don't cut it, don't break it by hand, otherwise it will be ugly and even the work may be torn. We should grasp this degree well.