How to adjust the light speed and continuous shooting of the camera?

How to adjust Nikon SLR to continuous shooting?

1 and Nikon SLR have many models, and different models have different continuous shooting parameter switching methods.

2. Some Nikon SLR devices use the left shoulder dial to adjust and cut the continuous shooting, such as D8 10 and D7200. Continuous shooting dial is under the left shoulder dial. The method is to press and hold the fixed button of the left shoulder dial (some keys are backward and some keys are forward), and at the same time rotate the lower dial of the right shoulder dial to align with the set number of continuous shooting sheets (such as CL, ch, etc.). ) with scale reference fixed line on the side. Release the fixed button to complete the setting, and the camera enters the continuous shooting state. As long as the shutter is pressed, the camera will continuous shooting according to the set number of continuous shooting;

3. Nikon's SLR adopts the right shoulder dial mode, such as DF. , and directly switCH CL, ch, etc. Use the dial key instead of holding down the fixed key of continuous shooting switch;

4. Nikon's SLR adopts menu adjustment, such as an entry-level SLR like D5300. The method is: enter the menu, and the path is shooting menu-release mode-high speed continuous shooting (CH) or low speed continuous shooting (CL). After setting, exit and the camera will enter continuous shooting mode.

How to realize fast continuous shooting without flash?

Shooting flowing water or water droplets can be a challenging shooting theme. In this tutorial, we will show you how to capture an impressive splash without expensive equipment, such as an external flash or a photo studio. I put together some simple steps, including all the settings, skills and equipment needed to ensure success.

I. Equipment

Every professional photographer has a lot of different equipment, but amateur photographers may not want to buy it, but this should not be a reason to give up taking beautiful photos.

Preparation before shooting: red wine glasses, scissors, clips, scotch tape, paint box.

Second, the installation

The scene setting is simple. Good lighting is very important for high-speed shooting, which will allow you to use a smaller aperture and provide a greater depth of field for the picture. If the whole glass is in focus, the photo will look better.

Another important point is that the glass is inclined at 45 degrees. Try different angles and find that this angle can splash water into or out of the glass.

Next, you can try different angles. In order to get the real creative effect, you can shoot from one angle and then modify it in post-production.

Third, how to set up the camera?

Now it's time to set up the camera, which is the key to the success of underwater photography without external flash. First, set the camera to manual mode, because you want to get a clear image, so please keep the ISO at around 200-400 to avoid graininess in the photo.

When it is necessary to freeze a moving object, it requires a fast shutter speed, which means that the aperture can stop at f/5.6-f/ in 1/640- 1000 seconds.

8. If you can't get the correct exposure, please change the ISO setting before making other settings.

Fourth, shoot

If the shooting effect is not very good, please check the self-timer delay time. Therefore, it is only necessary to determine the height of the water flow. When preparing to splash water, put a bowl under the cup, but a towel or bucket will do.

Wipe the glass before each shot to avoid stains on the glass from affecting the perfect splash photo.

5. Image post-processing

After shooting, you can use photoshop or lightroom software to make some minor adjustments:

expose

contrast

You can also adjust the saturation and hue as needed, which depends entirely on your idea of taking pictures.

Press the continuous shooting button below the touch ring dial to set the continuous shooting mode.

Canon digital camera continuous shooting settings are as follows:

1. Find the shutter drive mode button on the fuselage;

2. Enter the shutter drive mode selection (select the second mode);

3. Press the shutter to start continuous shooting after framing (the cable is best released);

4. Let go and end continuous shooting.

Canon, the world's leading comprehensive group that produces image and information products in Japan, has been globalized and extended to various fields after years of unremitting efforts since the establishment of 1937.

For more information on how to set up a Canon continuous shooting, please visit: See More.

How to set up Canon Expressway continuous shooting?

hello

Operation method: Take Canon EOS5D camera as an example. Turn on the camera. On the shoulder screen of the camera, you can see the drive button. Press this button, and the wheel will wave to the continuous shooting icon, and the continuous shooting icon will be three stacked squares. Then press the shutter to shoot. Parameters such as the number of continuous shooting can be set.

Precautions for camera use: Do not wipe the lens of 1 and Canon EOS5D with a wet cloth. It is recommended to use a professional cleaner.

2. Don't expose the battery of Canon EOS5D to sunlight, which may cause battery damage.

3. Canon EOS5D can't focus, and the shutter may be damaged. It is recommended to contact after-sales maintenance.

4. Canon EOS5D has been useless for a long time. It is recommended to take out the battery and keep it safe, and charge it regularly to avoid battery aging.

5. Canon EOS5D should not shoot the lens at the sun, which may cause the lens of the camera to be damaged.

6. Canon EOS5D is dusty and can be wiped with a clean soft cloth.

Data expansion: Canon EOS5D is a stand-alone machine that can satisfy photographers' pursuit of high pixels and has extremely high imaging quality. Its 1080P full HD video shooting capability will definitely be favored by users. The maximum resolution of Canon EOS5D is 4368×29 12, and the maximum pixel is13.3 million.

How to adjust Nikon SLR to continuous shooting?

Continuous shooting mode can take multiple photos in a short time by loading the data into the high-speed memory inside the digital camera instead of transmitting the data to the memory card.

Continuous shooting setting method of Nikon SLR camera:

1. Press the release mode dial lock release button, which is the button at the lower left of the dual-mode dial;

2. Continue to switch the release mode dial to CL or CH, that is, the lower dial in the dual-mode dial;

3. Finally, press and hold the shutter button and release the shutter continuously to enter continuous shooting.