Traditional Culture Encyclopedia - Photography major - Which is more difficult, Kulejia or Sanweijia?

Which is more difficult, Kulejia or Sanweijia?

Lighting is divided into automatic lighting and manual lighting. Because automatic lighting is more convenient, taking automatic lighting as an example, cool music is more difficult. The automatic polishing steps of the two softwares are as follows.

1, cool music automatically lights up. Step 1: Select a lighting template. It is recommended to choose a natural and realistic template. Step 2: After the template is selected, the tool will automatically generate a lighting system. We need to delete all of them and re-light the scene. Step 3: Taking the master bedroom as an example, determining the brightness and angle of sunlight determines the effect of sunlight coming in from the window. After testing and adjustment, the color of the sun is white, the brightness is 80%, the azimuth angle is-58, and the pitch angle is 25. Step 4: hit a surface light source outside the window. The size of the surface light source is basically the same as that of the window. The brightness of surface light source is 800%, and the light color is white. Step 5: After the outdoor lighting is determined, the light pushing method is adopted here, and a small area light source is set indoors at the lighting entrance. The light color of the light source in this area is white, and the brightness is 1000%. These four steps are applicable to all bedroom spaces and can meet the basic design requirements. Step 6: Divide the furniture, ornaments, table lamps and light levels in the bedroom scene. You can choose to decorate the space with spotlights and spherical lights to illuminate the desk lamps and ornaments on the bedside table. The brightness of spherical lamp is 150%, that of RGB255/206/ 135 is warm yellow, and that of spotlight 1 is 40%. Step 7: Finally, we can choose to add some fill light to brighten the dark parts appropriately. Fill the light mainly to increase the brightness of the dark part of the space, to avoid a certain area being too dark and the overall space being uncoordinated, and the bedroom bed area being dark. We choose a surface light source to simulate the illumination of ceiling ceiling lamp, the light color is white and the brightness is 600%. 2, automatic lighting of three-dimensional home. Step 1: Left-click "3D" to enter the 3D state, and then left-click "Render renderings". Step 2: Click "Rendering" with the left mouse button, and then click "Zoom" icon with the left mouse button to enter the 2D plan. Step 3: Select the lighting type as required, and then click the left mouse button to confirm the selection. Step 4: After the automatic lighting is completed, return to the aerial view. After adjusting the angle, you can click "OK to render" with the left mouse button. Step 5: If the light is embedded or blocked by the ceiling, you can "fill the light" on the left side of the interface and modify the ground distance according to the actual situation. (Note: The height of the lamp from the ground is generally lower than the ceiling 10mm. For example, the ceiling height is 2400, and the light height from the ground can be changed to 2390. ) 3. After comparison, it is more difficult for Kulejia to light up automatically.