How to paste the frosted paste on the glass?

1. Prepare materials in advance: scraper, watering can, scrub pad, knife and ruler.

2. Compare the frosted sticker on the glass to be pasted, mark it, and cut out the size of the sticker with a knife and ruler according to the mark.

3, clean the glass, be sure to clean it. Spray foam water on the glass with a watering can, and clean the glass surface again with a scraper.

4. Spray foam water on the glass with a watering can, and clean the glass surface with a scraper.

5. After cleaning the glass, spray a layer of clean pure water on the glass with a watering can.

6. Stick the scrub on the glass with pure water. Because there is water on the glass, there is no need to worry about sticking to the glass after pasting.

7. Scrape the frosted sticker flat with a scraper and scrape off the water inside. After several days of leveling, when the water inside is dry, the sticker will stick firmly to the glass.

8. If the matte film has a large area, you can remove the backing paper while pasting. Do not remove the backing paper at one time.