In solidworks, how to make camera animation to make vision change with moving parts? ...

1. Take a house as an example. First of all, complete all the supporting furniture, as shown in the figure, and render the material color.

2. Assemble and place, and the final effect is shown in the figure. Position constraints can be adjusted by yourself, or you can change the room design by yourself.

3. Based on the plane under the window, draw a curve sketch as the camera's walking route, and adjust the viewing place according to your own needs.

4. After completion, insert auxiliary blocks to constrain the top plane to coincide with the lower plane of the window. The distance from the midpoint of the block to the vertex of the curve is 6700 mm, which is adjusted according to the length of the line segment drawn by yourself.

5. Add advanced coordinates, select the midpoint of the block connecting line and the drawn curve, set the constraint to path coordinates, set it to "change with path", and set the yaw control to Z axis.

6. Select Add Camera, and then click the right mouse button to edit the camera, with the front midpoint of the block as the target position and the back midpoint as the camera position.

7. Click on the example of motion, pull the time bar to 9 seconds, and the distance from the point in the constraint block to the endpoint of the curve is 0. After the operation is completed, calculate.

8. Click Play and the camera starts to move along the curve.

9. Save the animation and play it with video software. The effect is shown in the figure.