How to mount the camera on a tripod?

First, open the foot tube of the camera tripod. The camera tripod needs to be opened to the maximum angle position to be the most stable. Note: The angle needs to be adjusted according to the design of the camera tripod. Because this design is novel and unique, it is no different from other camera tripods. Other camera tripods are generally150 c.

2 Adjust the height and height

Adjust the height and angle of the camera tripod to a suitable position, ensure that the camera tripod can be placed on a horizontal plane smoothly, and tighten the central shaft. Note: to meet the shooting height, first consider extending from the foot tube, and finally consider raising the central axis.

3-way lens

This step depends on the specific situation. Generally, there are two situations: those with pan-tilt and those without pan-tilt.

Operation method of tripod with pan/tilt: screw the quick assembly board into the screw hole at the bottom of the camera, and then clamp the quick assembly board with the pan/tilt camera.

Operation method of tripod without tripod head: fix the camera with the bearing plate bolt on the bearing plate of the tripod shaft. In this case, pay attention to whether the size of the bolt (screw) is consistent with the size of the screw hole at the bottom of the camera. Generally speaking, the screw hole size at the bottom of the camera is 1/4 ",and the bolt size of the central bearing plate is 3/8". Therefore, in order to install the camera directly on the supporting plate of the intermediate shaft, a conversion piece is also needed. Then, tighten the bearing plate bolts with the screw holes at the bottom of the camera.

I hope it works for you.