What is the problem that Canon fs 100 camera can't be turned on after charging?

Canon fs 100 camera adopts intelligent lithium battery (BP-808).

There are several possibilities for "unable to start after charging":

1. Please check whether the battery is fully charged.

The battery is insufficient (it may also be that the battery is aging and the power storage capacity is reduced), or there is oxidized dirt at the contact between the battery and the camera, which will cause the camera to fail to turn on.

It should be: a, ensure that the battery is fully charged. If the battery is aging, it should be replaced with a new battery;

There is no time limit for lithium batteries, subject to the color change of charger indicator light. Generally, it can be filled in about 3 to 5 hours.

B clean the oxidized dirt at the contact between the battery and the camera to ensure good contact.

2. Is there an error in the boot operation? For example, the mode dial was set to the "playback browsing" position, but the LCD screen was not turned on at that time, so it was ignored.

3. If it is confirmed that the boot operation is accurate and the battery power supply is normal, it may be a hardware failure of the camera, such as poor contact caused by oxidation of the power switch contact.

This kind of fault is recommended to be sent to customer service for testing.