Why can't my surveillance camera connect to the phone hotspot?

Power supply: firstly, confirm whether the camera is powered on normally and whether the indicator light or infrared light is on. Restore factory settings: press the machine reset key for 8- 10 seconds. Test scope: Keep the camera and router within 2m during the test, and return to their original positions after the test is normal.

If the phone is not connected to the network, just reset the network; If the on-site monitoring camera fails, it can be repaired; Mobile phone can't set connection monitoring, just open it in the software; The network is unstable, just restart the software.

The equipment is full or the signal is not good. The mobile phone of the network monitoring camera can't connect to the monitoring hotspot. It is possible that the number of hotspot connections is full or the network signal is not good.

There are usually three reasons for this: the camera itself is disconnected from the network or there is something wrong with the power supply. You can go to the site to check whether the power light is on normally and then test whether the network can be connected. If necessary, you can restart the device to see if it is back to normal.

Ask the operator if you owe the phone bill. If it can be used, please put it into Xiaomi mobile phone, turn on the data flow switch, reset the default in Settings-Access Point APN, then restart the mobile phone and try again.

Home surveillance, if it can be seen. If you can't connect in the future, you need to go home and have a look. It mainly depends on the possibility of monitoring, which may be that there is a power outage at home, resulting in no electricity for monitoring.