The camera doesn't know how to adjust it.

Question 1: The camera of the computer doesn't know how to adjust the focal length. If you can turn the lens on the camera, you can adjust it.

Question 2: How to adjust this camera and why is it so blurred? Asking for guidance is basically automatic now. You can watch it directly in the chat window or watch the buttons on the camera.

Question 3: What should I do if the QQ camera is blurred? The camera is not clear. It may be that the quality of the camera is not high, that is, the video resolution is low, the camera pixels are low, or the driver is not installed correctly. The first two are hardware problems, and the last one is software problems, which can be solved by changing drivers.

The function of led lamp is to illuminate the subject in weak light, otherwise the light is too weak to shoot the picture directly, and it is dark;

The clip is to make it easier for you to put the camera in an ideal position, such as above the display screen and so on.

Question 4: The surveillance camera is not clear about how to debug it. Surveillance cameras are blurred for two reasons:

(1) There are cobwebs or dust on the glass plate of the camera. Just wipe it off.

(2) The lens in the camera is not properly adjusted, so it is necessary to disassemble the shell and adjust the lens inside.

Detailed video website of lens adjustment: v.ku6/...vsogou

The video above is just a general method. Different machines have different shell structures. If you can't, don't force it. Take it to the home appliance repair place or send it to the warranty.

Question 5: What is the reason for the blurred video in the camera? How to solve hello! This is due to the inaccurate adjustment of the focal length of the camera. Most brands of cameras can twist the lens ring to adjust the focal length. Specific operation:

Open the video window of camera application software, or QQ video window, and slowly twist the lens ring left and right, and the scene in the video window will gradually become clear from blur. No matter whether the scene in the video window is far or near, when you twist the lens ring, it will change from fuzzy-clear-fuzzy to a certain point. When the scene you need is in the clearest state, the adjustment is completed.

Question 6: What if the computer camera is not clear? Some computer cameras have poor quality, low pixels or insufficient light. It will definitely be unclear. If it is blurred, first look at the camera lens for dust or water mist. Then you can rotate in front of the camera, and you can rotate to the left. Rotate until you are satisfied. If not, it is recommended to change the camera. That camera is old or of poor quality.

Question 7: How to adjust the sharpness of the computer camera? If you want to adjust the camera clearly, you can rotate the lens and adjust the focal length. In addition, is to adjust the software. I wonder if your camera has management software. If so, you can save the focal length, light and so on in the software.

Question 8: What is the reason for the blurred picture of the desktop computer camera? What is your use environment? If the light is not good enough, the picture will be blurred.

Second, update the camera driver. The driver file may be damaged.

Question 9: How to adjust the blur of the surveillance camera may be due to the following reasons, in no particular order: 1, the lens or cover glass is dirty, please clean it. 2. Backlight and mobile camera. 3, poor lighting or insufficient fill light, increase the fill light. The focal length of the lens is not adjusted, so adjust it. 5. If the lens interfaces do not match, if the C-type interface is connected to the CS-type interface or vice versa, install the lens connecting ring or replace the lens. 6. If the service life of the camera is long or the quality of the camera is poor and the equipment is aging, replace the camera. 7. Adjust the lens aperture to achieve the appropriate luminous flux.