How to pull out the battery for Sony photography

First of all, you made a serious mistake. Do not continue to use the camera after it is flooded. Because the camera is flooded, it will cause a short circuit in the internal circuit, which may further damage the camera.

If other functions of your camera are normal, it is simply a problem with the display screen. If you have strong hands-on ability, you can disassemble the camera yourself and unplug the cable plug between the display screen and the motherboard. Note: Some cable sockets have buckles, so you need to gently pry up the buckle locking piece before pulling out the cable plug. Look for the right direction when prying the locking piece of the buckle, and pry it from the opposite direction when inserting the cable, because prying in the wrong direction will damage the socket. As shown in the figure

Then scrub the cable plug with anhydrous alcohol, dry it with a hair dryer, and then install an LCD screen to see if the symptoms are good. If the fault is gone, it will be fixed. If the fault is not good, there is something wrong with the LCD screen, which should be sent to the maintenance department for repair. In terms of LCD, non-professionals should not disassemble it easily.

Send it to the maintenance department for repair, which may kill you. If you think the maintenance cost is too high, you can buy a new LCD screen of the same model as your camera online and install it yourself.

If you want to disassemble the camera by yourself, search the Internet first to see if there is a disassembly diagram of your camera. If yes, disassemble the camera according to the disassembly diagram to avoid man-made damage to the camera during disassembly. Secondly, it can prevent the loss of small parts during disassembly. Third, the camera can be put back more smoothly. If there is no drawing for disassembling the machine, it must be disassembled carefully, and the order of each disassembled part should be clearly remembered. When reassembling, it can be successfully completed as long as it is installed in the opposite order. No matter whether there is a drawing disassembly machine or not, every small screw removed should be recorded and placed separately, otherwise these small screws will make you feel at a loss when reassembling.

Another important thing when disassembling the machine is anti-static. Anti-static is not good, and sometimes it will damage the electronic components of the camera.