How to extract the flexible shaft pump shaft

The steps of extracting the flexible shaft pump shaft are as follows:

1. Make sure that the lubricating oil or other lubricants around the shaft are cleaned or wiped.

2. Remove the corresponding bolt or clamp on the pump body with a wrench or tool of appropriate size, so that the flexible shaft pump shaft can be completely pulled out.

3. After ensuring that the shaft has been completely removed from its seat, pull the shaft out of the pump body. If the shaft is stuck in the pump body, it may be necessary to tap it gently with a rubber hammer to ensure that the shaft moves evenly along its entire length.

4. If it is necessary to replace the shaft, make sure it is clean, smooth, free of scratches or wear, and aligned with other parts. Note again that lubricating oil or other lubricants should be applied around the shaft to ensure its smooth movement and reduce wear.