Detailed instructions for using the watch camera

The watch camera has a stylish and exquisite appearance and stylish and exquisite quality. It is not only easy to carry, but also easy to use and operate. It is an essential practical tool in business, life, media, justice, education, tourism, medical, security and other application fields. , then how to use the watch camera? Today I will introduce the instructions for using the watch camera in detail.

Instructions for use of the watch camera

1. Power on/take pictures/save: Press the power button. After powering on, the yellow light will stay on. Press it once and the yellow light will flash. At this time In standby mode, short press the blue light and the blue light will flash once to enter the camera mode. Press once to take a photo; in standby mode, press the camera button and the blue light will light up for three seconds, then the blue light will go off and enter the video recording mode. (Note: The camera will automatically shut down if there is insufficient disk space.)

Archive: In the recording state, short press the camera button to save the video. At this time, the yellow light flashes, and the indicator light is in standby mode (i.e. Not recording or shutting down), it will automatically shut down if there is no other operation for about 1 minute.

Shut down: In standby mode, long press the power button, the blue light will flash three times.

2. Reset button: If a crash occurs, please press the reset button and restart.

This version of the software (V2.5) adds the function of displaying the recording time above the recorded video file. The method to correctly set the video pen time is as follows:

1. Edit a text file with the content:

2014-10-1909:05:24

Please Pay attention to the format, it must be correct, less than two digits (such as the 8th, it should be written as 08), and maintain a certain advance of seconds.

2. Name the file time.txt

3. Insert the video pen into the computer and copy the above files to the root directory of the video pen U disk

4. Unplug the video pen from the computer, turn it off, and then turn it on again to complete the new time setting.

5. Once the time is set, it will be saved in the video table.

Instructions for using the watch camera: Connecting to the computer

1. Check whether there is a USB port on your computer (some computers can find the back-end USB port but not the front-end USB port. Please contact the system supplier if necessary).

2. Use the USB extension cable provided with this machine to connect to the PC USB interface. After the correct connection, you can find the drive letter of the removable disk on My Computer.

3. When the camera watch is connected to the PC, the camera watch has started to work as the PC's mobile hard disk. At this time, you can view video files, transfer, copy, paste and delete data (audio, video files, etc.) very conveniently through the computer, and you can also store non-music files

4. Eject the USB device:

a. Double-click the Safely Remove Hardware icon on the Windows interface (green arrow in the lower right corner).

b. Select Stop in the Safely Remove Hardware dialog box.

c. Select the device to be stopped, select OK, the device is safely deleted, and the Safely Delete Hardware Information prompt box pops up at the green arrow in the lower right corner. The USB MassStorageDevice device can now be safely removed from the system.

d. Close the Safely Remove Hardware dialog box.

e. Disconnect the player from the PC.

The above is a detailed introduction to the instructions for using the watch camera. I wonder if you have learned it? During use, you need to pay attention to using it in a well-lit environment. Do not point the camera directly towards the sun or other strong light sources. , to avoid damage to the optical components, and cannot be used in an environment with excessive dust density to prevent the lens and other components from being contaminated with dust, affecting the camera effect, etc. I hope the above content can help you.