How does the surveillance camera connect the TV and the hard disk video recorder?

1. In the POE monitoring system, since there is no need to lay an additional power cord for the camera, the spoe switch is not only responsible for power supply, but also for network connection. Take an 8-port switch as an example, in which lan 1/2 can be connected with a hard disk video recorder and a router, and spo3-8 can be connected with a spoe network camera.

Secondly, then the installation of the bracket. Generally speaking, it's almost the same. Most of them are directly locked with screws and installed above the monitoring position according to the actual situation.

Third, after the camera is installed, connect the wire. Spoe technology makes the connection simple. There is only one network port.

4. If it is installed outdoors, it is strongly recommended to use waterproof kit.

5. Here, specify the LAN2 port of the SPOE switch and connect it to the LAN 1 of the router with a network cable.

6. After the switch and the router are connected, when the router can connect to the external network, connect the LAN 1 port of the spoe switch to the network port of the hard disk video recorder with a network cable.

Seven, after this boot, the device will automatically scan the camera in the network and automatically connect online. As long as you manually install the corresponding application, you can view it remotely through simple settings.