5 Maintenance Electrician Personal Work Summary in 2021

1. 2021 Maintenance Electrician Personal Work Summary

Since I graduated from a technical secondary school and started working in 20xx, I have been working conscientiously in the position of maintenance electrician for 13 years. Looking back on this In ordinary years, there are professional qualification certificates obtained through hard study and tireless guidance from teachers, as well as leadership recognition and various honorary certificates brought by hard work and study! All these achievements, I think, are due to my belief. I firmly believe that the working class is the leading class of the country and that the working class is the fundamental force in building socialism with Chinese characteristics. In response to the party’s high theoretical banner of building socialism with Chinese characteristics, ’s call, while abiding by the law and fulfilling my duties, I have always upheld the belief of striving to improve my professional knowledge and work hard to make a small contribution in socialized mass production! This is also the guiding ideology of my work and life. Anyone who leaves his guiding ideology will achieve nothing. I would like to summarize my professional and technical work since taking office as follows:

1. Pay attention to theoretical study, guide practice with theory, and strive to improve one's own professional level.

The foundation of all electrician techniques is to learn safety techniques. On this basis, we can boldly learn control techniques. Whether in my early days as an electrician apprentice or now as an electrician squad leader, paying attention to theoretical learning is an important magic weapon to strive to improve one's professional level. When I worked in the shipyard in the early days, my master was very conservative about control technology and almost blocked me all the way. Under these circumstances, I became more and more enthusiastic about theoretical study. At that time, my salary was only 200, and I couldn’t bear to eat, so I borrowed books to read. I remember that I borrowed an electrician’s manual at that time, which was a very thick one. What impressed me most now is x62W universal milling machine. At that time, due to the conservativeness of the master, the contactors were not allowed to be touched, so I followed the diagram in the manual and made three-dimensional drawings of the milling machine contact buttons and other three-dimensional drawings on the paper, and then connected the wiring of the entire machine tool according to the manual, which will be controlled later. I laid a good foundation in technical learning, which is still fresh in my memory now, and the subsequent learning is more formal, and I have participated in various trainings. Of course, due to the development of the Internet, knowledge resources are shared to provide us with theoretical learning. More convenience! I have also been good at learning from the Internet since 20xx, and this year I also helped others design and answer questions on Baidu Zhizhi, with an adoption rate of 60%, which consolidated my knowledge and effectively guided practice at work!

Of course, I have a deep understanding that the so-called theory does not mean sticking to books. Theoretical things are not things in books. Teachers and lecturers can provide you with theoretical knowledge. Books are just a system for mastering knowledge. Guide, you should be good at asking questions about knowledge, so that the understanding of knowledge will be easier and faster. What can be understood in one hour of reading may be enough in ten minutes with the teacher's explanation, so whether in practice or theory, you must be good at asking questions. .

2. Don’t be afraid of hardship or fatigue. No matter what company, there is something to learn from.

Everyone can make great achievements. Many people always like to say this when communicating: Wow, then your equipment is advanced. I really hope to work and study in your factory! What I want to say is that it doesn't matter if the equipment is advanced and there is learning. As mentioned above, although the master was conservative about control technology, he still learned a lot of basic knowledge and good working habits, such as the proficient use of tools, and learned about windlasses, cable winches, generators, tachometer generators, sonar and radar systems. The key points of disassembly and assembly broaden your horizons! And as I got to know more and more colleagues, I had more opportunities to learn. Later, I came to help work in my colleagues’ units, and I was recognized by the leaders of my colleagues’ units, who allowed me to visit some modern equipment, such as dyeing machines. The stenter machines are all imported equipment, and even the control drawings of the equipment were lent to me to read. I cherished this short learning opportunity. During the help work, I got an overview of the control of the entire modern equipment, such as frequency converters, PLC, The understanding of sensors has been in-depth since then, and all of this is the result of the spirit of not being afraid of hardship or tiredness and being good at studying! The same was true when it came to Ningbo Chengnian Pharmaceutical. Through learning and exploration, the purified water PLC program was successfully transformed. As for the unit in front of me, there are many electronic circuits in the equipment, so there is naturally a lot to learn. The company has passed safety standards twice. Because the power supply system is not standardized enough and the information is not complete enough, in order to save costs, I led the team to transform the power supply system myself. , often working overtime until late at night. At the same time, the transformation process gave me a deep understanding of the five grounding systems, and the maintenance of the inverter welding machine greatly enriched my knowledge of electronic technology. The transformation of the CNC flame cutting machine allowed us to systematically consolidate the control technology, save capital for the factory, and improve production efficiency. In short, you can learn something by working in any kind of factory. Even if it is a garbage factory, the chargers used by workers to charge electric cars when they go to work are all places where you can learn. If you can understand it, electronic ballasts, Frequency converters and inverters will bypass the analogy! It is precisely because of this kind of work that I have been awarded the company's outstanding and advanced awards for several consecutive years!

3. No matter what stage of professional title you are in, you must be good at thinking and summarizing experience

As an electrician, you must always take notes and summarize your own experience! This is conducive to consolidating what has been learned, conducive to future inquiries to improve maintenance efficiency, and conducive to imparting knowledge to others.

There are a lot of basic knowledge that are easily overlooked at work. For example, why is the secondary side of the machine tool transformer also grounded? Some people confuse it with the isolation transformer. Even senior workers now can't explain the reason. In fact, this is common sense. , which is a protective measure taken to prevent the primary side from flowing into the secondary side low voltage. Furthermore, many senior workers now generally don’t know the meaning of AC3 on the CJx2 contactor. If you don’t pay attention to this when selecting, it can easily cause waste!

2. Maintenance electrician’s personal work summary in 2021

In xx, with the care and support of the power supply office, various economic and technical indicators and work tasks were completed well, and the work was a complete success. First, return to the public To the leaders at all levels and to the colleagues around me, I have only done some work that should be done and fulfilled some responsibilities. After years of training and tempering, I fully understand the profound meaning of the corporate spirit of “loyalty and dedication, pioneering spirit, learning and innovation, and quality service” advocated by superior leaders and a series of advanced corporate cultures. In Huilongsi Village, as a Although electricians cannot directly create economic benefits for the local area like other businesses, they play an important role in protecting the environment, just like a small screw on a machine.

Looking back on the work process over the past year, I have mainly done the following aspects of work:

1. Better completed the technical indicators assigned.

As of December, our village has fully completed the power supply, the electricity bill recovery has reached zero every month, the safety production has achieved the "three noes", and has maintained a long-term safety record, high-quality service and integrity The service has achieved good results, with "zero" complaints throughout the year.

2. Production safety has maintained a relatively stable situation.

Over the past year, in accordance with the requirements of "clear responsibilities, strict discipline, strong supervision, and heavy rewards and punishments" put forward by the institute at the beginning of the year, I have put safety inspection production at the top of all work, strengthened the implementation of safety work, and established Establish an all-round, whole-process safety production, actively participate in various safety activities organized by the bureau and institute, pay attention to safety investigations and research, go to the construction site to understand the actual situation, solve practical problems, pay attention to safety management during the project construction, in this year's tense During the transformation of the rural power grid, due to effective cooperation, safe production was ensured throughout the entire process and accidents were prevented. Equipment maintenance and tree obstructions were handled in place, reducing the distribution accident rate. The distribution equipment integrity rate was 100%. According to the actual work, The focus is to detect hidden dangers, investigate signs of accidents and unsafe factors and completely eliminate safety dead ends.

3. Seriously implement services and standardized management.

Over the past year, with policies and regulations as the guideline and quality service as the purpose, we have conscientiously served farmers, improved service quality, actively purchased more power supplies, standardized work procedures, implemented services for customers, and adhered to The phone line remains open 24 hours a day and is available on call. For customers who are inconvenient to live alone or alone, we insist on door-to-door service and implement the "heart-to-heart" project. As soon as we receive a repair call, we will immediately come to the door for inspection. General accidents will be repaired immediately. Special accidents will be explained and explained without leaving the night. For users with limited mobility, we take the initiative to collect fees at their doorsteps, three or four times a month. Our honest service strives to reduce overdue payments and power outages, and has been well received by users. I am even more proactive in my actual work. From August to September this year, the world-famous Olympic and Paralympic Games were held in Beijing. In order to ensure that the masses can watch TV programs and ensure safety and timely power, I gave up my rest time and worked hard every day. For more than ten hours, we checked the lines and equipment and dealt with various hidden dangers in a timely manner to ensure that no power outage occurred during this period. During this year's peak electricity consumption in autumn, there was not a single power outage due to my responsibility, ensuring farmers' production and use of electricity. With hard work and enthusiastic service, we have achieved customer satisfaction. In short, no matter it is day or night, windy or rainy, as long as we receive an accident call, we can help customers solve problems as quickly as possible. Copying, verifying and collecting are the focus of our work, which directly involves our economic benefits. , at work, we seek truth from facts, read the meter on time every month, do not estimate the reading, do not miss the reading, review it in a timely manner after reading, and take back what should be collected, not more, not less, in accordance with the assessment methods formulated by the power supply department, Calculated on a monthly basis, I have implemented the responsibility for the electricity bill recovery work so that there is electricity delivery. If I can't find anyone, I have to go to the traffic jam in the morning and go to my house at night to ask for it. It is really a lot of hard work and I have tried every possible means. After unremitting efforts to ensure that the monthly electricity bill is collected and settled on time. There were no complaints throughout the year, which standardized rural electricity management, reduced the burden on farmers, and established a good image of our power supply enterprise among farmers.

Although I have achieved certain results in my work in XX, I must also face up to the existing problems and deficiencies, and improve the industry style and work style for higher goals in the new year. Work discipline must be further strengthened. The awareness of quality service and honest service needs to be further strengthened.

The above is a summary of my personal work. If there are any shortcomings, please criticize and correct me!

3.2021 Maintenance Electrician Personal Work Summary

I am XX in XX Graduated from a technical school in 1998, majoring in coal preparation, and was assigned to work in the coal washing workshop of Linhuan Coal Preparation Plant. In 1998, he entered the electromechanical position. In November 20xx, I went to the Wobei Coal Preparation Plant to participate in the commissioning, and has been serving as the monitor of the peripheral class since then.

I have been engaged in electrical equipment maintenance work for 16 years, and have experienced many ups and downs during this period. From being an apprentice to a master, I have taken care of 5 apprentices. From the master to the current manager, there are currently 18 maintenance electricians. Now we not only have to do the daily maintenance and repair work of the company's electrical facilities, but also provide technical guidance to the following employees. When encountering difficult problems, they have to go to the site to troubleshoot. After troubleshooting, you have to explain to everyone the cause of the fault and what they overlooked when looking for the fault. Let them learn from experience not only so that everyone can independently repair similar faults in the future, but also learn to draw inferences from one example.

In these years of work, I have summed up a lot of experience, including skills, mentoring and educating people, experience, and work performance.

1. Consciously strengthen theoretical study and strive to improve personal quality

In many years of work practice, I deeply understand that without a firm and correct political direction, there will be no positive progress. guiding ideology. In order to improve my ideological and political level, I have developed the habit of caring about national affairs over the years, paying attention to domestic and foreign situations, analyzing the impact of situation changes on enterprises, and putting this thought into practical actions to ensure my own Our thoughts and actions must always be loyal to the party's line and principles, constantly study the important thinking of the "Three Represents" and the "Eight Honors and Eight Disgraces", strictly demand ourselves according to the standards of party members, and learn from advanced role models. Strengthen the construction of one's own quality, and influence the people around to join the ranks of pioneers and strive for excellence, and provide suggestions for the development of the enterprise.

Some people say: If a person wants to become a talent, he must first be a human being. The truth is self-evident. That is to say: for a person to succeed in his career, he must first learn how to behave, especially in the highly technical job of a maintenance electrician. He must work hard, be attentive when doing things, and be open-minded when studying. There is no room for sloppiness and mistakes. At work, you must first have a correct attitude, develop good professional qualities, be serious and responsible for your work, obey leadership arrangements, listen humbly to others' instructions and suggestions, subordinate your personal interests to the interests of the company, be polite to others, and be enthusiastic in service. Only in this way can you be competent at your job.

Second, technical experience

When doing electrical equipment maintenance over the years, I have helped colleagues solve many difficult problems, many of which also had soft faults. There are also problems with the replaced components themselves, but some maintenance personnel do ignore these points.

They trust new components too much. When they find out that a certain component is burned out, they will easily install a component of the same model. After testing the machine, it was found that the fault still existed. At this time, according to his inertial thinking, he would naturally check whether other components were damaged. After earth-shaking searches, the root cause of the fault was never found. A intact circuit board had been turned upside down.

During the search process, due to the high concentration of attention, the scope of the search continued to expand. After working for a long time, there was still no result, and pressure and tension followed. Thinking will also become confused and no longer as clear as it was at the beginning. Later, I was asked for help. Before I took action, I had to carefully ask the equipment user what abnormal conditions occurred when the equipment failed, including sound, smell, and temperature.

In fact, when making repairs, electricians should be like doctors treating patients. They first carefully ask the patient about their condition, where they feel uncomfortable and how they feel. After questioning, you can know which part has the problem and narrow the scope of the fault. The patient's story is also very important. If he has a headache and turns into foot pain, it will divert your judgment on the fault point. You will go through a lot of hardships, and then ask the previous maintenance personnel to understand his repair process and the symptoms that occurred after replacing the parts.

During these inquiries, I discovered something else. I knew what areas he had missed and failed to check. I also needed to evaluate whether new faults might be caused after his repairs. The fault at this time might not be there. It's not as simple as the beginning again. Human faults, original faults themselves, and soft faults may also occur. First, make a preliminary inspection of the equipment to determine whether it can be turned on. If it can be turned on, you should turn it on and "listen", "smell" and "touch" carefully, and then check the working voltage of the components that were replaced at the beginning and whether the output voltage is the same as that marked on the drawing. According to the measurement, the working voltage of the new component is normal, but the output voltage does not match the voltage marked on the drawing.

The component was removed and measured and it was found that the component was damaged. But this does not rule out that the component burned out due to other faults after installation. After measuring the voltage and current of the peripheral components related to this component, no abnormalities were found. I just took a component that matched this and measured it first to make sure it was installed properly. Try troubleshooting again. At this time, the maintenance man said with surprise on his face, "Why didn't it work when I replaced it?" I asked him if you had measured whether the component was good before installing it. He said that the new one was still used and it must be good. Yes. I reminded him that if you want to be a good maintenance electrician, don’t believe too much in new components, and sometimes don’t even believe what you see with your eyes. Maybe what you see with your eyes is fake. For example, there may be a problem with the instrument itself during measurement. Sometimes a component may have a soft fault. It may be fine when you measure it, but problems may occur after a short period of time after being powered on. In this case, it may be that the thermal stability of the component is not good. , then what you see when measuring is false. When repairing this kind of fault, don't put too much faith in the data measured by the instrument. Use the replacement method, find a few good components of the same type and install them for trial use.

I think you need to use your own experience to judge everything you see.

4.2021 Maintenance Electrician Personal Work Summary

Since I started my job, I have been continuously strengthening my self-cultivation, working hard to improve my ideological and moral level, and conscientiously carrying out various cultural and professional tasks. Deepen the study of knowledge, constantly explore new knowledge, forge ahead, actively carry out various tasks within the scope of intelligence, fully perform job responsibilities, and play a good role as a model. Actively participating in technical exchanges and scientific and technological innovation activities, Dadi has played a good role in spreading, helping and leading, and has fully completed various tasks and indicators assigned by superiors, playing its due role in the company's production and development. I now summarize my professional and technical work since taking office as follows:

1. Consciously strengthen theoretical study and strive to improve personal quality.

Without a firm and true political direction, there will be no positive guiding ideology. In order to continuously improve my political and ideological quality, I have been very concerned about national affairs in the past few years, paying attention to domestic and foreign situations, analyzing the impact of situation changes on the enterprise, and putting this thought into practical actions into the production process to ensure I have always been consistent with the party and the enterprise in my thoughts and actions. At the same time, we also bring this kind of thinking into work and study, and constantly pursue our own progress. Some people say: If a person wants to become a talent, he must first be a human being. This is true. This means that if a person wants to succeed in his career, he must first learn how to behave! Especially those who do our highly technical work must look at things carefully, work attentively, and study with an open mind. There is no room for sloppiness and mistakes. First of all, we must have a correct work attitude, have good professional qualities, be serious and responsible for our work, obey leadership arrangements, listen humbly to other people's guidance and suggestions, unite colleagues, treat others politely, and serve enthusiastically.

2. Correct your work attitude and take the lead

Since I started working in the company, I have been engaged in all electrical engineering matters, including safety and quality supervision and inspections during all infrastructure construction periods. I am fully aware of the importance of electricity management during the construction period, especially the electrical infrastructure and projects that are mostly invisible. They must be supervised and inspected at any time. If problems are found, they must be solved. They must not be hastily, otherwise there will be endless troubles and no further problems. Eradication is a test and responsibility for our electrician management.

As an electrician class monitor, I am bound to shoulder the responsibility and burden. Therefore, in my daily work, I not only require my team members to be careful and meticulous when supervising and inspecting, but I also know that blacksmithing requires hard work. I have made some strict requirements for myself: first, when encountering dirty, hard and dangerous work, I must be the first to do it before the workers, and I must do more and work harder than the workers.

Second, we must stand up when encountering technical difficulties and do our best to overcome them. I always insist on trying my best to do everything well and put the interests of the company first. Including the production process after completion, sometimes I raced against time to deal with large and small electrical equipment failures, which won valuable production time for the company and laid a solid foundation for the company's development. I think that since I am preparing to take the exam A technician is better than an average worker in many aspects such as professional level. When the company assigns tasks, when it is difficult for ordinary workers to complete them, they must take the initiative and take on the tasks proactively, not to blame the workers. They must act like technicians and shoulder heavy responsibilities bravely. I usually not only ask myself in this way, but in practice, I also follow these requirements. Therefore, I want to play the role that a technician should have in the company and establish the good image that a technician should have.

3. Safe production to ensure the safety and quality of the company’s electricity consumption

1. As the company’s electricity meters run for a long time and the load increases, they will suffer from aging, measurement errors, and insufficient capacity. Problems such as these have become increasingly prominent, resulting in serious resource losses (loss of electricity bills) and potential safety hazards in electricity use. At the beginning of the year, the center invested a large amount of money to update electric meters and replace and reconstruct non-standard internal wiring in the entire company's business stores. The meter update construction started on January 4, 2009 and was completed on April 18. The replacement electric meters are allocated according to the capacity of each store. The electric meter models are: electronic single-phase DDS438 type 5-20A, 10-40A, 20-80A, electronic three-phase four-wire electronic meter 20-80A, total: 2200. Assisted the construction team to rectify irregular indoor wiring in 1,572 households.

2. Due to the rapid development of business households, the demand for electricity is increasing year by year. The center has invested heavily in ensuring the safety of power supply for grid lines, main lines and indoor lines. In May, the power lines of each group were evaluated and the capacity of overloaded lines was increased: 50MM2 copper core cables were newly installed. More than 80 households have installed air conditioning lines during high temperatures. Replacement of underground cables on 4 cement poles tilted towards the market. The pressure on the power supply lines is relieved and the peak period of electricity consumption is smoothly passed.

3. The power supply from the west power distribution room to the Guanghua Shoe Industry Base is a legacy issue from history. On February 27 this year, a dual power supply reverse power supply accident occurred at the company’s shoe industry base, which had a great impact on the market power supply. Safety hazard. The leaders of the center attached great importance to it, and the department promptly replaced 4 DW16-2000A intelligent circuit breakers in the east and west power distribution rooms. With the mediation of the three parties, the department arranged for an electrician team to cooperate with the power supply company to complete the electricity separation project of the shoe industry base.

4. Implement safety production responsibilities.

1. Company leaders put safety production first. At every morning meeting, the section chief repeatedly reminds each member to maintain their own safety before going to work and at high altitudes. In particular, the section chief and Engineer Ye personally inspected and supervised various production tools, and any tools that were found to be seriously defective or damaged were destroyed in a timely manner. There were no personal, power grid, equipment, fire or other accidents throughout the year.

2. From June to September, in order to ensure the safe use of electricity and the quality of electricity in the market during the high temperature peak period, the company arranged dedicated personnel on duty in the east-west power distribution room and van type power distribution room to eliminate equipment faults in a timely manner. And keep equipment operation records every hour to ensure reliable operation of each loop.

3. Conduct routine inspections of water and electricity in the company and Guanghua Shoe Industry Base every day, and handle any situation in a timely manner. We also cooperate with the company's monthly production safety inspections. Promptly rectify matters with hidden dangers in water and electricity.

4. Regularly inspect the scheduled power outage control system, street lights, and broadcast monitoring systems every Friday, and make inspection records. This year, we plan to replace more than 150 street lamps of various types. If any abnormal conditions are found, we can make adjustments at any time and report any difficulties to the company leaders in a timely manner.

5. Before each typhoon, conduct a comprehensive inspection of the internal power supply line network, light poles, cables and other electrical equipment, outdoor billboards, electric rolling doors, drainage pipes, etc. to prepare for rainy days.

4. Fully cooperate with equipment repair and testing, and strengthen equipment maintenance

Taking into account the opportunities during the low period of electricity consumption, we overcame difficulties and divided the power supply, and carried out rotational maintenance of all equipment in mid-November. , pre-testing and defect elimination work. Equipment maintenance in the east and west power distribution rooms worked closely with construction personnel to complete the switching operation of power transmission equipment, the arrangement of safety measures, and on-site safety supervision and management. During the maintenance, it was promptly discovered that the high-voltage cable in the west distribution room was leaking and discharged, so the original 70MM2 copper-core high-voltage cable was replaced with a 120MM2 copper-core high-voltage cable. The low-voltage cabinets in the east and west distribution rooms replaced 2 sets of isolating switches (2000A), 3 sets of DW15 circuit breakers (630A), 44 self-healing capacitors, 5 switching contactors, and scattered small accessories. At the same time, anti-corrosion treatment was carried out on the base, tie rods, box surfaces and other parts of the corroded equipment in the high-pressure room. Operation, power switching, cleaning and maintenance of a single piece of equipment during maintenance, acceptance of equipment after maintenance, etc.

5. Do a good job in the whole team’s job and establish water, electricity, broadcasting, and monitoring files.

1. This year’s electric meter replacement will improve the meter data, keep records of the electric meter update construction, and mark the dismantled old meters into storage for each household in the group. Keep a record of the electricity consumption readings of the old meter and the number and capacity of the new meter.

2. Prepare planned water use reports for the company’s 13 water meters every month and send them to the Municipal Water Conservation Office. Read the active and reactive power meters in the east and west power distribution rooms and substations, and register and archive the data each time.

3. Prepare power supply equipment maintenance and annual inspection reports. Establish a special account for major equipment to record each maintenance item, the model and quantity of equipment materials replaced, and the operation of the equipment after maintenance.

4. Manage the electrical warehouse work well. Regularly make an item consumption report and an item entry and exit storage list. Ensure a certain inventory of commonly used spare parts and spare parts, and register the materials that are shipped out of the warehouse and where they are used.

6. Strengthen business learning and improve technical level

"You will never be able to learn until you are old" is my motto. Today, with the continuous development of science and technology, if you don't learn for a day, you will be left behind. Especially in the area of ??electrical automation, no one can be 100% proficient in everything. It is constantly being developed and updated, just like computer software, it is updated every day and is developing all the time. Maybe you recognized it yesterday, but in two days it has changed and more advanced stuff has been installed. So I usually read more professional books whenever I have time.

In the past few years, I have collected a large number of new professional books and materials, constantly enriching myself and mastering new knowledge. For example, "Electrical Design Drawing", "Electronic Technology", "Modern Frequency Conversion Technology", "Application of DC in Industry", etc. In the process of learning these knowledge, I learned a lot of new knowledge, such as: PLC programming control The principles, ABB inverter setting and control principles, SIPMOS high-power triac control principles, etc. have really benefited me a lot!

It not only broadened my knowledge, but also improved my technical level to a great extent, and also made me have a strong interest in learning higher-level theoretical and technical knowledge.

5. Maintenance electrician’s personal work summary in 2021

1. Ideological understanding.

In the first half of the year, as a squad leader, I was strict with myself in thinking, loved my career, strictly required myself according to the requirements of the squad leader, spurred myself, and strived to be the best in the minds of my colleagues both mentally and at work. All set an example. Actively participate in various activities organized by the factory and the company, such as lectures given by the factory supervisor. Over the past six months, I have obeyed and cooperated with the leadership to do all the work in the production department. I believe that in my future work, I will overcome my shortcomings and make greater progress through my own efforts with the care of my leaders and the help of my colleagues. In the second half of the year, I will work harder, study harder, and make myself truly a squad leader who can withstand any test.

2. Maintenance work.

In terms of maintenance work, the tasks in the first half of the year were very heavy, but no matter what, in order to improve my maintenance level, I insisted on reading some related books, and often looked for some mechanical maintenance information online, and also Strive for opportunities to chat with colleagues and learn from others' strengths. I usually humbly ask experienced teachers for advice. I often go to the equipment site to see and communicate with the production department to find out the defects they have in the operation of the equipment. I take notes and deal with them in a unified manner. If the problems cannot be solved, I report them to the equipment power department through the OA process for technical support.

3. The work of the squad leader.

I strictly demand myself, work hard, and be able to complete various tasks assigned by the leadership. Since we are mechanics, this special profession determines that we still have a lot of work to do. I obey the leadership's arrangements and work diligently. I mainly complete the monthly equipment maintenance plan and daily maintenance work arrangements, and also handle some Sudden accident. And completed all the tasks assigned by the leadership well. In the future work, I will continue to be down-to-earth and work more actively with the leadership to complete various tasks and work harder for Huafeng's bright future.

4. Attendance.

While doing all my work well, I strictly abide by the company's rules and regulations. To properly handle the relationship between company work and individuals, I am still formulating the attendance system so far. I will use the previous system as a version and add some actual work conditions. I will use the least time to gradually improve the attendance system. In the second half of the year, I will be more diligent, do more things for myself, work harder to learn professional knowledge, and take my business level to the next level.

Based on the above points, there are still shortcomings. As the saying goes, "no one is perfect", I will spend more time leading all my colleagues in the mechanical repair department to use their own professional skills to serve myself and them. To find a larger development stage. As the monitor of the xx driver class, xx has always kept in mind one sentence during the year of work: "Thousands of important things, ten thousand important things, safe driving is the most important!". As a result, xx did not have any assessment accidents in traffic safety work. In actual work, he does this:

Obey the law and drive safely

In daily work, xx believes that if you want to drive a safe car well, you must first firmly establish With safety first in mind, we must learn and abide by all laws and regulations of the government and relevant departments, obey the instructions of traffic management personnel, and truly "concentrate your thoughts when the motor starts! When the wheels move, think of the masses." He attaches great importance to traffic safety learning, and he deeply realizes that safe driving is not just an arm's length talk on paper, it is earned by thousands of people with their blood and lives. He has always believed that when dealing with traffic accidents, we must "don't let go" (don't let it go if the cause is unknown, don't let it go if corrective measures are not implemented, and don't let it go if the punishment is not in place).

As the driver class leader, I manage the production vehicles of the property management company and the vehicles used in the community. The property management company currently has two vehicles, a passenger truck for production, a special sanitation vehicle for the community, and a sprinkler truck. I own a car. My usual job responsibility is to manage the driver's driving tasks and vehicle maintenance. The workload is large and trivial. How to manage the work well is a question I have always seriously considered. Starting from the beginning of this year, I will start with myself. He can strictly demand himself at all times. While doing his job as a car driver, he can conscientiously manage the vehicle and dispatch the vehicle, use the vehicle rationally, and ensure that each vehicle reaches the utilization rate. In order to contribute to the company's savings and funding, I taught myself vehicle maintenance techniques.

Through dedicated research and hard study, he mastered simple vehicle maintenance techniques in just a few months. If something goes wrong with any vehicle, I would first I first conduct a comprehensive inspection of the vehicle to find out what kind of fault it is. Sometimes I can’t schedule my work time, so I use my spare time to go to the unit to repair the vehicle alone. In this way, I can repair the vehicle that does not need to be repaired at the repair station. Being able to handle it myself not only saved the company money for car maintenance, but my approach also touched the drivers in the team. They were able to strengthen the care of the vehicles in their daily work and enhance the dedication of the team members in their daily work. My approach has been well received by the cadres and employees of the whole company!