Traditional Culture Encyclopedia - Photography major - How to use Canon 550d SLR camera?

How to use Canon 550d SLR camera?

Step 1

Plug in the charger provided. When the charger is in a stable position, the indicator light will light up, indicating that your battery is fully charged. Take out the battery from the charger, turn the handle at the bottom of the camera, open the battery box and insert the battery.

Second step

Remove the lens cover from the lens provided by the digital SLR camera. Delete Press the release button next to the lens from the cover of the fuselage to release the upper limit. The matching index between the people in line on the lens and the corresponding points on the lens. About EF-S cards, white people, they are red and EF lenses. Insert the lens, release the shutter and rotate until it is safe.

Third step

Insert the memory card of the camera and open the right door of the camera body. Make sure that the edge of the small metal slot card enters the camera first. Please close the door when the camera is ready to take pictures.

View pictures

Step 1

Set the power switch of the camera to "On" and set the "Mode" on the rectangular dial to "Car" green. Look through the viewfinder of the camera and gently press the shutter button. When the shutter reaches half, the shooting data will be displayed near the bottom in order to see the autofocus point in the center of the viewfinder.

Second step

Aim the camera at different objects and observe how to focus automatically with the change of shutter speed, aperture and exposure reading. Press the shutter and take pictures all the way down. I need some pictures for the camera to feel and practice loading them into the computer.

Third step

According to the camera manufacturer's instructions, load the Canon image editing software provided by the computer. Once the software is installed, it will detect your camera whenever you connect to the computer.

Fourth step

Provide a USB cable that plugs into the USB port of the computer. Locate the USB port on the left side of the camera. This is a rubber protective sleeve, which is exposed this time to pry open the port and insert the small end of the cable. Turn on the camera. The software should detect the camera and provide the transmitted image. Please check whether the selected folder is the picture you want, and then click Download. The image editing software will open and display your pictures and shooting information.

The most important thing is to read more instructions.