How to set the Sony flash?

Sony flash setting steps are as follows:

1. Install the Sony flash on the camera and make sure it is properly connected to the power supply.

2. Open the camera menu and enter the flash setting options.

3. In the flash setting options, select the appropriate mode. For example, you can choose manual mode or automatic mode.

4. If you choose manual mode, you need to set the power and aperture of the flash, which can be done by rotating the control button on the flash.

5. If the automatic mode is selected, the flash will automatically adjust according to the brightness of the ambient light.

6. If you want to use the high-speed synchronization function of Sony Flash, you need to ensure that both the camera and the flash support this function and enable it in the camera menu.

7. You can get the best lighting effect by adjusting the angle and position of the flash.