Does anyone know how to install a spherical 360-degree rotating camera? It is best to have an operation diagram or a detailed installation procedure.

Installation method of 360-degree rotating camera.

Please refer to the following:

1. First, take out the machine and debug it, as shown in the figure below.

2. Head position of the front camera. The front camera is fixed with screws and does not need to be punched.

3. The position of the rear camera is the same as that of the front camera, as shown in the figure below.

4. The left camera is installed under the rearview mirror and can be fixed after drilling with an electric drill.

5. Right camera, same as above, as shown in the figure below.

6. Adjust the monitoring angle of the camera. Generally speaking, 1/5 has a good figure.

7. Fine-tune the camera angle according to the image on the car display screen.

8. Then observe the image from four angles to see if a panoramic image can be formed. Please pay attention to the camera angle to ensure that the image is clear and wide, and the installation is complete.