Traditional Culture Encyclopedia - Photography major - Who knows how this photo got 200 points?
Who knows how this photo got 200 points?
150w box may not be enough. Just add a 580 U2 lamp and a reflector.
1, main lighting arrangement:
First put on the background cloth, and put a small stool in the middle left position for the model to use. Put the flash on the soft cover, on the lamp holder and on the right front of the camera. After the general position of the light is set, please ask the model to sit down. Communicate with the model before the official shooting to explain the effect we need to shoot. Communication with models is very important. No matter how you plan to shoot, make the model feel comfortable and cooperate with your shooting. After the preparatory work is done, the main light is officially arranged. The main light is placed at the right front of the camera at a 45-degree angle, and the height is basically flush with the model's head, and the light is directed at the model's face.
The main lights are arranged and ready for shooting. Because the color temperature of the flash is close to sunlight, we set the color temperature of the camera to 5500K and the sensitivity to ISO? 100, use manual focusing. First of all, we connect the flash synchronizer to the light meter, and set the light metering point in the camera on the model face to measure the incident light in the direction of the portrait face. The exposure combination is1125 seconds, F5.6. After setting the camera according to the photometric results, install the synchronizer to shoot. (Exposure meter is preferred).
2, reflector fill light:
Now fill the model with reflectors. Fix a 32-inch double-sided reflector on the shelf, place it according to the position shown in the above picture, and fill the shadow surface of the model with silver surface, with the center of the reflector facing the shoulder of the model.
After the reflector is set, turn off the main light and use the spotlight reflected by the reflector to shoot: you can see that the original shadow part has details, and adjust the position and angle of the reflector to get the best light supplement effect.
The next step is to arrange the lights. Put the flashlight on the left, behind the model, and the light hits the model's hair from above;
After arranging the lighting, turn off the main light, remove the reflector, and shoot with the lighting alone. According to the highlight exposure of the hair, see the effect of the lighting. The lighting effect is as expected. Turn on the main light, put back the reflector and try again.
At this point, the three-dimensional portrait effect created by the main light source, supplementary light and lighting has been presented. At present, the only regret is that the background is dark and needs background light to solve it.
The last step of lighting is to install the background light. Put the last flash in the soft light box, put it on the low light frame, put it behind the model, and pat it flat on the background cloth:
After the general position of the background light is determined, it is necessary to shoot, see the lighting effect, and then make adjustments. Turn off the main light and the light, and shoot the lighting effect of the background light alone: the brightness and over-brightness of the background are exactly what we need, just adjust the angle slightly.
At this point, three light sources and a light reflector are ready. Turn on all the lights and shoot, and a standard light portrait with "oil painting effect" appears in front of us. This kind of lighting is a classic one. Because the lighting effect is very close to the works of oil painting master Rembrandt, it is called "Rembrandt lighting method". ?
Above, * * * study together! ?
Supplement to the question:
1, lamp, buy a 580? Two U2, you'd better buy a reflector.
2, machine parameters, sensitivity ISO100; ;
White balance, user-defined, varies according to the shooting effect, but in most cases, setting 5500K is enough;
Original storage format. In this mode, post-processing is more convenient. If it's too much trouble, you can print jpg directly. But when jpg, the "peripheral brightness correction" is set inside the machine? "High ISO sensitivity noise reduction function"? "Automatic brightness optimization"? It is best not to open these three items, so it is easy to grasp the overall style. Sharpen with ps in the later stage.
3. The simplest lighting is one left and one right (about 2 meters), and the main light is hung on the camera. If you want to make it brighter, just adjust the lamp distance and put a reflector.
- Related articles
- Summary of how trade union cadres do a good job in propaganda work in the past six months
- Portrait photography: where is the portrait cut?
- What is the annual tuition fee of Ganzhou Modern Science and Technology Vocational School?
- Is Ding Chengxin a volunteer for the Winter Olympics?
- What was his name again?
- Ellen Joyce Loo, a Hong Kong star, fell to his death and his apartment was sold by the landlord at an ultra-low price. What is the reason?
- School honors of Longgang District Xinzi School
- Characters experience of Sun Jinqiang
- Photographic tape
- When is the best time to visit Chongyi Shangbaotai?