Fuji xt30 second-generation tutorial is coming _ _

The second generation tutorial of Fuji xt30 is coming.

Parameter introduction

Product type: micro-single.

Pixel: 26 10.

Date of listing: 202 1.

Framework: APS-C.

Lens mount: Fuji X mount.

Endurance: 390

Weight: 358g.

Focus: Support the face/eyes.

① Front indicator panel

Turn the dial selection menu tab or browse menu to adjust aperture, exposure compensation, sensitivity or switch photos during playback: find the dial and switch back and forth between aperture and sensitivity. Hold it down continuously and select the option selected in the command dial settings menu.

②AF auxiliary light/self-fear indicator light

When ON is selected in the "AF auxiliary lamp" menu, this lamp will light up for auxiliary focusing when the shooting scene is dark; This light will flash when the self-timer function is enabled.

③ Focus mode selector

Switch selectors to select S (single focus mode), C (continuous autofocus) and M (manual focus lower limit).

④ lens release button

Used to remove the rivet head. Press this button to install and rotate the lens sleeve, and the lens can be removed from the body.

⑤ handle

Used to remove the pin head. Press and hold this button and turn the lock to shoot. Hold it in your hand.

① LCD/touch screen

Change the settings of display menu, play and browse photos, display light room and shutter speed frequently. In addition, the screen may be touch-sensitive, and you can operate it by clicking and sliding your finger on it. By tilting the display screen, you can shoot in a lively posture.

② Delete button

Press this button while watching the hot film, and the selection interface for deleting photos will be displayed on the screen. Then press the MENUIOK button to enter the photo deletion interface.

③ Play button

Press this button to play the taken photos. Before turning, command the turntable or press the left key to select the picture with direction.

④ diopter adjustment controller

If the parameter indication in the electronic communicator is vague, you can pull out the controller and then rotate it until the electronic viewfinder displays a clear focus.

⑤ Electronic viewfinder

When shooting, you can make a composition by wiping the electronic viewfinder.

⑥ Eye sensor

When the photographer approaches the electronic viewfinder, the sensor can automatically sense, and then the camera will automatically switch from the display state of the LCD screen. This is the so-called electronic viewfinder display.

⑦ TV mode

Press this button to select whether to use electronic viewfinder display or LCD display, or automatically switch between viewfinder and LCD display.

① Band ring

Install the camera tape by hand.

② Flash pop-up lever

Press this button to pop up the built-in flash.

③ Drive the turntable

Move the dial to aim the required icon at the sign line, and then you can choose action modes such as single shot, continuous shooting, surround, multiple exposure, panoramic photo, creative mask and animation recording.

④ Flash lamp

In low light environment, you can lift it to the opposite side to select rows.

⑤ Shutter speed dial

Press the shutter speed dial to lock and release the technical girl, and then turn this helmet to select the shutter speed value in S and M aiming modes. When the turntable is turned to A, it is in the aperture priority exposure mode, and when both the turntable and the aperture ring are turned to A, it is in the program automatic exposure mode.

⑥ Power switch

Used to turn the camera on or off.

① Shutter button

Half-pressing the shutter can turn on the autofocus system of the machine, and full pressing can complete shooting. When fully pressed in animation recording mode, video recording will start, and when pressed again, video recording will end. When the camera is in the power-saving state, lightly pressing the shutter can restore the mirror to its working state, and the lock can be removed from the body.

⑧Fn button (function button)

By default, press this button to open the "Face Recognition and Eye Recognition Settings" function.

Pet-name ruby exposure compensation dial

Turn this knob to select the warm light compensation value between 3+3.

Attending automatic mode selector lever

When the auxiliary lever is set to white point, shooting modes of P, A, S and M can be selected; when the lever is set to AUTO, it is automatic shooting mode.

1 1. Hot boots

When the lighting lamp is externally connected by hand, the contact point of heat energy coincides with the melting point of the external landscape lamp, and a wireless stepping device can also be externally connected to play the role of flashing when there is a video lamp.

①AE-L (exposure lock) button

Press and hold this button to lock the exposure.

② Rear indicator panel

You can select the combination of shutter speed and aperture (P mode) by rotating this dial. Shutter speed grinding (M mode) 8 In playback mode, rotate to the right and then point to a special dial to enlarge the current photo, rotate to the left until it is displayed as a thumbnail, and rotate the broadcast when setting the shortcut menu, but you can change the setting: in focus area mode, the rotating dial can adjust the size of the camera to find the center of the dial, and can perform the function assigned to the dial or enlarge the current opposite point.

③AF-L (focus lock) button

Press and hold this button to lock the exposure.

④ indicator lamp

This light indicates the current working state of the camera with different colors and flashing States, and bright green indicates focus locking; The flashing green light indicates focus or low-speed shutter warning; Blinking green and orange indicates that the camera is on and recording photos, or it is required to turn off the camera during WiFi transmission: flashing orange indicates that the pre-film is being recorded and shooting cannot be continued; Flashing orange indicates that the flash is charging; Flashing red indicates that there is an error in the lock or memory card.

⑤Q button

Press this button to enter the quick menu interface, where you can use the arrow keys to select the required items, and then turn the dial to quickly modify the settings.

⑥ Focusing rod (focusing rod)

Warp the focus bar to select the position of the focus point, and press the focus bar to select the central focus point.

All landowners ⑦MENUOK button

In shooting state and playback mode, press this button to display the camera menu at this stage; Pressing this button plays a certain role in the leather stretching operation.

⑧DISP/ back button

It is used to control the display of information on electronic viewfinder and LCD screen. In shooting mode and playback mode, press this button several times to switch the screens displaying different information in turn. In the process of menu operation, pressing this key plays the role of quitting and canceling.

① battery box

Remove the battery after opening the battery box.

② Memory card slot

After opening, you can install a 5G health card.

③ Speaker

Used to play sound.

④ tripod mounting hole

Used to fix the camera on the wicker frame.

① Microphone jack

You can record stereo sound when shooting video by inserting an external microphone with stereo sound and a miniature broadcast head into this hole.

②USB connection jack (type C)

You can use the USB cable within 1.5m to broadcast to the entrance of this building and the entrance of US8 floor of the computer, and copy the grid to the computer photo: connect the JSB interface of the printer to print the photo.

③HDM connection jack (type D)

Connect the camera and TV with an HDMI cable within the range of 1.5m, and you can view photos and videos on the TV.