Traditional Culture Encyclopedia - Photography major - How to make digital photos smooth and transparent

How to make digital photos smooth and transparent

Everyone may feel this way. It's ok to look at the digital photos taken on the camera display screen, but when they are transmitted to the computer display screen, there is often a feeling of gray, which suddenly makes people unhappy. In fact, it is understood that whether it is Canon Bunny or ordinary Nikon D50;; Whether it's high-end consumer digital DC

, or ordinary pocket machine, under certain circumstances, photos will appear dull tone, opaque image quality, small contrast and gloomy.

Generally speaking, there are two solutions:

First, pay attention when shooting, and strive to shoot the best quality photos; When shooting: 1, you need to know and master different lighting modes, such as side lighting, backlight and top lighting, and the light characteristics of different scenes such as snow, rain and fog in different time periods such as early morning, noon and dusk. 2, accurately set the white balance; Adjust the combination of ISO, aperture and speed; Accurate focus, camera shake can not take clear photos; 3, unless necessary, try to avoid cloudy sky in the picture; 4, you can use the reflector and flash to fill the light properly; 5, as long as possible, shoot RAW format; Second, the necessary repair and retouching should be carried out later: 1. Firstly, the exposure, white balance, contrast, tone and color of the picture are evaluated by observing histogram, black field and white field overflow and RGB information. 2. Adjustment of white balance, that is, the middle tone is determined by the color scale or curve, and the black field and the white field are adjusted; 3. Adjust the hue/saturation of different channels; Adjust brightness and contrast with curves to enhance color contrast; 4. Use mixed mode effects such as color filtering, soft light and layer superposition for many times and adjust the opacity appropriately; 5. If necessary, use the photo filter to unify the tone; 6. Necessary sharpening.

LAB mode brightness channel sharpening method, multiple small intelligent sharpening+fading method, etc.

In addition, some netizens have explored some methods: 1, and took the best photos in the early stage.

After post-sharpening, overlapping edge finding is completed. 2. "Take the best high-quality photos in the early stage"

, is definitely wisdom. A few more minutes when shooting can reduce the processing time after 10 minutes, not to mention the impact on the later image quality. For landscape films, there are basically two ways: mylty ply+ picture+superposition.

, or just multiply the positive film and adjust the opacity.

People's photos mainly use superposition, which is equivalent to the mixed mode of positive superposition and color filtering mode, and the effect is good. In addition, the filter color+soft light was tested. 3. About the experience of using RAW: C 1 pro is recommended. There is one item in the Exposure option.

"High contrast" means "high contrast"

Choosing this feeling, the photo suddenly became much more transparent. In addition, it is said that +2/3ev (of course, not as a prerequisite for exposure) was added in the early shooting.

Exposure to light works best. 4. First define black, white and gray with color scale or curve, which can generally take effect immediately, then sharpen or increase contrast with USM, and finally color. 5, adjust the opacity of the layer, or change the layer to soft light, color filtering and other modes, you will get different effects! 6. For non-professional photographers, some photos are inevitably gray. In fact, it is relatively simple to deal with the gray problem. Soften the copied pictures for ~~2 times and save them in Gao Fancha.

usb(USM? ) sharpen the knife, you might as well try it. 7. When shooting; Resolution +2

, color+1, contrast+1. 8. Copy a layer, use Gao Fancha to keep it, and choose Overlay as the layer mode. 9. To solve the gray problem, the early stage is the most important. First, you should set a good white balance and choose the right light when shooting.

Correct exposure, don't lose focus and make rational use of depth of field. Finally, the camera can't shake, and the photos can basically be kept clear.

Ladies and gentlemen, these are all worth learning and collecting by our novices. Everyone thinks they are inspiring. Let's try it right away and discuss the communication after seeing the effect.