How to adjust the color temperature best for Huawei Glory 10 photography?

1. Make sure your hand is not blocking the camera during shooting. If your hand blocks the lens, a little bit, the camera preview will appear red.

2. Adjust the camera settings and enter Settings >; Display > color mode > color temperature. Warm color mode makes the screen yellow, and cool color mode makes the screen blue. Adjust it according to your own preferences. If it is a little too much, it will cast color and affect saturation.

3. Huawei's mobile phone is color cast. If the phone is not only in the photo preview interface, but also in all interfaces, it is necessary to confirm whether the color correction function is turned on. If so, turn it off and try to enter the shooting interface.

To do this, click settings > advanced settings > accessibility > color correction off.

The setting path of some mobile phones may be a little different. Click and set >; Intelligent assistance > accessibility > color correction.

4. If only the photo preview interface is color-cast, the screens of other interfaces display normally, and see if any filters are turned on. If yes, close the filter mode and the color of the photo interface will return to normal.

5. Whether the color cast of Huawei's mobile phone is in preview or above the shot, take a photo to see if the actual shooting effect is normal. It may be because the camera software has not been adjusted to the ideal preview effect in some preview scenes, resulting in red or shadow on the screen during camera shooting. But there is no problem with the photos actually taken.

6. In the photo preview interface, slide the screen to the left to enter the camera settings interface, slide the screen to the bottom, and then click Restore Default to restore the camera settings to the default values and try again. In addition to previewing the interface, look at the photos taken.