Summary of probation period for ship surveyor

Time flies and a piece of work is over. Looking back on our past work, we have gained a lot. We should check, tidy up and write a work summary. However, I found that I didn't know what to write. The following is a summary of the work of the surveyor during the probation period. Welcome to learn from it, I hope it will help you.

Summary of Probation Period of Surveyor: 1 Time flies, and 20xx years are about to pass. In the next year, under the leadership of the company and the project department, I successfully completed the work for one year. Looking back on my work experience in the past year, we should also see the shortcomings in my work. We should guard against arrogance and rashness, and welcome 20xx with full enthusiasm.

I worked as a surveyor in your company for 20xx years, and surveying and setting out is the foundation of building engineering. Measuring and setting out is the criterion of each type of work in the project. Without it, our work will have no goal, that is, blind work will lead to mistakes that should not happen. Our construction industry is very strict with every working procedure in the project, so I am also strict with my own work. Focusing on the requirements of construction organization and survey scheme, the survey and setting-out personnel of the construction team are required to minimize errors and eliminate them. Do your job well. Bring the most favorable guarantee for the smooth construction of this project. In normal work, urge the pay-off workers of the labor service team to do a good job of pay-off, and assist in the pay-off of the floor plane and the leveling of the floor elevation. Strengthen patrol inspection in daily work, strengthen process control, find problems in time, solve problems in time and correct them in time. Nip mistakes in the bud; Avoid becoming a stumbling block to the progress of the project.

Since I started working this year, I have been working as the overall measurement of xxx project department. * * * * The Project Department is mainly engaged in secondary structure work; Live construction of local tail of main structure. Unite colleagues at work, be strict with yourself, and keep abreast of engineering trends. In order to ensure the smooth development of secondary structure and structural engineering at the same time, it is necessary to fully grasp the secondary pay-off of each bay, so I followed the labor service team to supervise and guide the pay-off work to ensure the accurate size of each bay.

I was informed by the company on XX, XX, XX that the project department of our company needed a surveyor, and I was transferred to the project department of * * *. The start of the project is the most difficult time for the project. Without any complaints, I listened to the leadership's personnel transfer arrangement, became fully familiar with the design drawings and supervision rules in the fastest time, made a survey plan, and learned the control piles, leveling points and pile coordinate data given by the supervision engineer or design unit. After receiving the pile bitmap, coordinates, elevation and other information sent by the design unit, conduct self-inspection and testing within the specified time limit. During the test, the chief engineer will guide and supervise the site, and directly hand it over to the labor service team when the site has no error and the accuracy meets the design and construction requirements, and ask it to be responsible for future maintenance and use; If more than two control piles are found lost or damaged in the future use, the design unit shall be required to make up for it. In the process of construction survey, it is required to implement according to the approved scheme, and conduct self-inspection and mutual inspection first, and then ask the supervisor for review after passing the inspection.

Xxx project is in the period of foundation trench excavation and continuous piling, and many things are done by the project department managers themselves, whether it is dark or white night, so as to be on call. In the process of continuous wall piling construction, it is necessary to locate and set out each pile point strictly and accurately, because the size of each pile point directly affects the size of the working face in the future. In this case, six trestle piles need to be driven between the civil air defense exit and the northeast civil air defense, and sewage pipes need to be horizontally erected above the piles. This requires that the pile point must be accurate, otherwise it will directly affect the structure and even eat the working face of the structure. In this case, Zhang He is familiar with the drawings carefully. After careful consideration of drawings and site for many times, six pile points were determined. After the foundation excavation is completed, the position line of civil air defense exit structure and the skin line of waterproof guide wall are released on site. After inspection, the trestle piles on both sides do not affect the structure and working face at all. The stone has been solved.

In the process of foundation pit excavation, settlement observation points are arranged around the foundation pit, and displacement observation points are arranged at the part where local retaining walls are built, and the observation is carried out in strict accordance with the period required by the specification, and the settlement and displacement observation records are made. When the foundation pit is excavated to the design elevation, the elevation and position dimensions of the sump, elevator shaft and post-pouring zone shall be strictly controlled. It is often that I calculate the upper and lower opening sizes of various pits from the axis according to the drawings, and then ask the pay-off personnel of the construction team to check the sizes before paying-off at the site, and often check whether the placement position is at the site. There are 5 1 uplift piles at 12B and 12C in the storage tank * *. Because the subcontractor has no surveyor or invited professionals to locate them, xxx and I were arranged to cooperate with them in the project to locate uplift piles, and we took pains to repeatedly locate them. Because uplift piles are connected with structural columns, almost every uplift pile has structural columns above it, so we located them. We will number each pile in sequence. On the day before setting out, we will calculate the size and position relationship between the two axes of the pile to be set out and draw a sketch. When setting out, use theodolite to set out all axes, and then use steel ruler to measure the distance. Finally, after inspection, quality inspection and supervision, the pile can be dug. Until now, the excavation of uplift piles has gradually come to an end. At this moment, the construction work of 13A and 12A is in full swing, and I will work harder to complete all the work of structural construction.

20xx is about to pass, so under the leadership of the company, assist the leaders of the project department to overcome difficulties and complete the tasks arranged by the leaders of the company with good quality and quantity; Ensure the smooth progress of daily work. In the next 20xx years, I will work harder and do better.

Summary of probation period of surveyor. 2. Internship is no stranger to every college student. Practice is to let students apply what they have learned to their work and achieve the purpose of applying what they have learned. It is also a test for ourselves, so that we can understand our own shortcomings from our work practice, and then we will not be lazy in future study. This is the first step for us to enter the society, which can make us better integrate into the society, work and live in the society, and lay the foundation for future work.

Measurement is an accurate job, which requires enough patience and care. There are many classifications of surveying, such as general surveying, photogrammetry, engineering surveying, photogrammetry and water transportation surveying. Different environments and different times use different measurement methods. General survey is generally used, and geodetic survey and photogrammetry are also used when drawing maps. General surveying and engineering surveying are used in the survey and design of engineering construction. General surveying is the foundation and engineering surveying is a professional branch. Then we will start designing and drawing.

Under the guidance of the instructor, we take good tools and measure a building project. First of all, we should master the relevant knowledge of all kinds of survey work carried out in the survey and design stage of engineering construction. The first point is to be familiar with the structure, principle and use of various measuring instruments and use them skillfully. The second point is to avoid wrong measurement results and minimize measurement errors. The third point is to understand the main sources of various measurement errors, mainly from three aspects.

1, the error of the instrument, that is, the problem of the instrument itself, belongs to the objective error source.

2. Errors caused by external influences, measurement in the big sun, refraction of eye light and other environmental influences. First, when measuring, be prepared.

3. The observation error is caused by the technical level of the surveyors and is a subjective error source. Under the guidance of the instructor, we began to measure, and in the process of measuring, we kept some influence in our minds. Then we packed our tools and went back to the survey project according to the measurement results. This is a meticulous work. The simplest one is on the map, which is a thousand miles away. Although there is only a little error, the result is the opposite.

The purpose of practice is to consolidate and deepen the theoretical knowledge learned in class, and further cultivate students' practical ability and communicative ability. After this practical surveying practice, I learned a lot of real things, such as being more proficient in operating experimental instruments, learning to draw topographic maps, using theodolite and level, drawing topographic maps and measuring damaged parts, all of which can't be done in class, which greatly improved my hands-on ability and brain ability, and expanded my communication and cooperation ability with my classmates. In the internship, I also know my own shortcomings, and the operation is not skilled enough, but I will work harder in the future.

Summary of surveyor's probation period: time flies, time flies, and I have graduated for more than five years in a blink of an eye. In these five years, I not only deepened my understanding of the original knowledge, but also had a better understanding of the knowledge that I didn't touch or didn't touch deeply in books before.

In June 20xx, I was assigned to the project department of Qinglang Hydropower Station as a surveyor, mainly responsible for the layout of excavation support (diversion tunnel, pressure pipeline, surge shaft and shaft) and the arrangement of indoor data. Have a corresponding understanding of site construction. In order to better complete the tasks assigned by the leaders, I actively read relevant materials and books, and asked professionals and colleagues what I didn't understand and what problems existed in my work. At the same time, in order to master more professional skills and knowledge, I also actively participated in some relevant vocational skills training within the unit. Can establish a correct working attitude in daily work, constantly sum up work experience, and actively help others while trying to do their job well, so as to be content with the ordinary and dare to bear hardships and take work as the first principle!

Measurement is the eye of engineering. As surveyors, we are engaged in surveying work based on the principle of seeking truth from facts, and everything is based on data. Through on-site work experience, I deeply realize my own shortcomings, lack of professional knowledge, lack of social experience, poor working ability and many other problems. These shortcomings have become the source of motivation for me to study hard, strengthen my professional knowledge and accumulate work experience, and strive to devote myself to my work with strong working ability, rich social experience and fuller enthusiasm!

With the patient help and encouragement of leaders and colleagues, through their own continuous efforts, personal quality has been significantly improved, and some achievements have been made in work, but there are still many shortcomings. I summed up what I have learned since I went to work and got a deep exercise. The actual work is summarized as follows:

First, rigorous, scientific and serious verification.

Before the construction survey, carefully review the drawings, and ask the leaders and predecessors for advice, consultation and study on the mistakes or doubts on the drawings in time. Before measuring and setting out, use CAD to calculate the coordinates and check them repeatedly to ensure foolproof. Pay attention to the preservation and timely sorting of all kinds of original materials, because experience is summed up from many materials!

After measuring the pay-off, carefully ensure the position of the composite line and ensure that the actual error of each line does not exceed half a centimeter.

Second, keep forging ahead and strive for perfection.

The society is progressing and the times are developing. Only by continuous learning can we keep pace with the times. All kinds of new building materials and construction machinery are constantly being used in construction. In contrast, more construction techniques and methods have emerged, and various specifications have been developed. In today's high-speed development, not self-improvement means backwardness and can't meet the development requirements of current construction work.

Third, accept the strengths of a hundred schools of thought and make up for their own shortcomings.

Absorb other people's experience in contact with professionals of Party A, supervision and other units, and go to the construction site for inspection and study at ordinary times to learn workers' construction methods and techniques. See the problems from the success or failure of others, and at the same time see their own shortcomings, so as to absorb the strengths of many families and make up for the shortcomings.

The above is my work experience and summary in the past five years. In the future work, I will constantly strengthen my professional knowledge and ability, learn more professional theoretical knowledge and on-site construction management from my colleagues around me, combine theory with practice, sum up experience and learn lessons, and challenge difficulties and setbacks with positive work enthusiasm. Cooperate with colleagues, help each other and create a better tomorrow. Make a modest contribution to the future development of the company.