How to chase the spotlight at the wedding?

1. "spotlight" belongs to professional stage lighting, and it has only been used in wedding scenes in recent years. The design structure of spotlight is more complicated than ordinary lighting, so the users must be trained before work. In order to avoid accidents and affect the wedding scene.

2. At present, the spotlight commonly used by wedding companies is 12W, and the light source is dysprosium lamp, so the starting power is higher than the normal working power. Therefore, the power supply should be connected directly from the electric well with a cable of 2.5 square meters or more. Prevent the power source from being overloaded and tripping, which is even more serious, causing a fire caused by excessive debt of wires.

3. Before the spotlight is officially used, it must be started for commissioning, because the built-in transformer spotlight is commonly used now. When the voltage is insufficient, it will cause the spotlight to self-check for a long time without starting the car. So as not to be caught off guard.

how to use the spotlight correctly in the wedding?

4. How many spotlights should be used on site? Personally, I think it is better to have more than two. Because the spotlight is a cold light source, the light beam is concentrated and not scattered. When the spotlight shines on the object, the contrast between the illuminated surface and the backlight surface is very large, and there is no way to supplement the light at the candlelight wedding scene. Therefore, a spotlight shines on the couple's face, which will cause yin and yang faces, and the couple will usually go through the happiness channel with backlight, and all of them will be sidelights in the ceremony after going on stage, which will greatly affect the image of the couple. If two or more spotlights are turned on at the same time, there will be no appeal consequences if there is a supplementary light source.

5. What should a candlelight wedding photographer pay attention to? Because domestic spotlight is commonly used in wedding companies, most of them don't have a SCR button to adjust the brightness of the light source when designing, so the brightness of the light is the same no matter how far away from the spotlight, so the photographer adjusts the white balance in the distance, and when the newcomer comes close, if it is not changed to manual zoom, the lens will explode. Candlelight wedding scene has few light sources, and the light is not filled. It is best to choose 3CCD and above models, such as SONY19P, SONY Digital HD, BETCOMA and other models to ensure clear effect. More than two cameras of the same level must be selected at the scene to ensure that the picture is comprehensive and complete. See the details of the specific shooting points later-the technical points of camera shooting in the wedding.

6. The placement position and height requirements of the spotlight. If two lamps and one bench are used when newcomers enter the stage. The other stand is used when the newcomers are facing the stage to fill in the light and the ceremony. If there is a third spotlight, it should be placed at a distance parallel to the second spotlight, each occupying a corner of the scene, and it is advisable to have no building in front of it. The height of the lamp is more than 2.5 meters, and the lamp holder is not direct to the human eye. On-site operation support should be on the table. But it must be stable, and the spotlight rotates left and right without scratching.

7. Matters needing attention in the use and maintenance of spotlight equipment. The spotlight belongs to high-end equipment at the wedding scene, which is expensive, bulky, heavy and complicated to operate, so it must be watched by someone. Handle with care during transportation, and the spotlight has a special turnover box. The bracket must be firm and stable, and two people must cooperate to complete the lighting. After power on, turn on the switch and wait for the machine to self-check for about 5-8 seconds before operating. See the instructions for details. But be sure to stop for more than 1 minutes from the last shutdown to the next start. Don't switch on and off frequently, the light bulb will burn out easily. An ordinary bubble needs at least 12 yuan. When replacing the light bulb, wait until the machine is cold. Touch the glass in the middle of the bulb. Be firm according to the installation. The vent of the lamp body should be unblocked to avoid affecting heat dissipation.

These are my personal experiences. Please see if they are suitable for you.