How does the camera connect to the network?

How does Joan's camera connect to the wireless network?

The specific steps for Joann camera to connect to the wireless network are as follows:

1. First, restore the monitor to the factory settings. The button you see after removing the monitor housing is the button to restore the factory settings. Just click on it.

2. Then install "interesting" programs on your mobile phone.

3. Open this program and enter the device interface. Click the+sign in the upper right corner.

4. The drop-down option will pop up and click "Add New Device".

5. Enter the "Configure Network" interface and select the "Fast Networking" option.

6. When prompted, click OK to return to configuring the network interface, and then click Next.

7. The monitor is waiting to receive the signal, and click the "Hear the connection prompt tone" button on the mobile phone.

8. Switch to the "Waiting for Connection" interface and click "Next".

9. Enter the "Connect Wifi" interface. If you receive the prompt "Connection successful".

10, just go back to the interface and refresh. Through the above steps, we realized the connection between Joann camera and wireless network.

How to connect a webcam through a mobile phone?

Set the dynamic domain name resolution of the IP camera, add the camera directly with the mobile APP software, and view the monitoring screen of the camera. The specific operation is as follows:

1. First connect the wireless network where there is a wireless network, then reset the camera, and then add a camera in the upper right corner of Mijia.

2. Please connect the camera before installation.

3, choose to connect to the network, mobile phones and cameras can be connected by connecting to the network.

4. Fine-tune the picture by sliding the left and right screens. On the far left is a small speaker, which is generally silent by default.

5. When the screen is horizontal, we can slide to the left to retrieve the previously shot video.

Matters needing attention

1, it should be noted that the local network signal we installed is better, and both the mobile phone and the camera are connected to a network. in addition ...

Our camera can be installed at home through mobile phone. When we help me, we don't need to control the camera. There are several options under the monitoring interface. We can fine-tune the picture by sliding the left and right screens.

3. Connect the wireless network monitoring camera to the computer. After turning on the computer, install drivers for wireless cameras, some of which are driver-free; 2 You can see the port and IP address of the wireless network monitoring camera on the computer, which can be set by default or manually;

The home wireless camera is connected to wifi. Only a few simple operations are needed, as follows:

Tools/materials: Xiaomi 1 1pro, MIUI 12, local settings.

1. Turn on the power of Xiaomi smart cameras, wait for the yellow light of the indicator light to flash, and enter the distribution mode.

2. Open Mijia APP, click+in the upper right corner, and click Add Device.

3. Select the model of Xiaomi camera, click on the WiFi to be connected, and enter the password to connect.

Method 2

1. Open the fluorite cloud video, add the camera to the fluorite cloud account, and connect the mobile phone to the router WiFi.

2. Click the three points on the right side of the device name on the fluorite page of the APP, and then click "Settings".

3. On the device settings page, click "Wi-Fi Network" and configure the camera with a WiFi network according to the page prompts.