Traditional Culture Encyclopedia - Photography and portraiture - Stereo photo's shooting method.

Stereo photo's shooting method.

A 3D photo is composed of a pair of photos with parallax around. The key to success in shooting 3D photos lies in how to properly collect the parallax effect of the left and right photos according to the distance of the target. The shooting mode can be parallel shooting with two cameras or double shooting with one camera.

One camera takes two shots, that is, only one camera is used, and the same target must be shot twice, which is suitable for shooting static scenes.

The method is to take a picture at a certain position and angle, and then move the camera a few centimeters in parallel to take another picture, so that a group of stereo photo with parallax can be obtained.

Three-dimensional slide rail shooting method, through the parallel movement of the arc slide rail, takes a group of photos at a fixed position, and then synthesizes them with three-dimensional software to get the stereo photo. 1 It is recommended that the camera be calibrated with a photographic resolution of 800x600 or higher;

2 When shooting, keep the camera horizontal, first take a left or right photo, then move the camera horizontally by 7 to 10 cm, and take a right or left photo. Remember, when moving the camera, it must be horizontal, and it must not be displaced or tilted up and down.

Single camera shooting method is to shoot the same target with two cameras at the same time, which is suitable for shooting dynamic scenes.

The method is to use a special stereo camera, or use two cameras to press the shutter at the same time and take two photos at the same time.

3. Erection method: Two cameras are horizontally and parallelly fixed on the platform;

4 camera adjustment The photographic resolution of the two machines must be consistent;

5 Press the shutter synchronously with both hands to shoot.