How to remove the lens

Things to note when removing the lens:

1. During the process of removing the lens, the lens must be pulled out vertically, otherwise it will not only be difficult to pull out, but also It is easy to damage the lens barrel or lens holder.

2. When rotating the lens, your hand should hold the lens barrel of the lens. It is not advisable to hold the aperture ring, focus ring, or zoom ring.

3. When installing the lens, align the red dot on the lens with the red dot on the body, insert it, rotate it in the required direction until you hear a locking "click" sound.

4. In an environment with heavy wind and sand, try not to change the lens to avoid damaging the internal mechanism of the camera.

5. When changing the lens of the camera, be sure to hang the camera around your neck.

The best order is: first remove the lens from the camera and hold it in one hand , use the other hand to reach the lens removed from the camera bag, then take out the lens to be replaced, install it on the camera, and finally put the replaced lens back into the bag. Note that some manual focus lenses have an aperture contraction lever at the bottom, so you must be careful when placing them and try not to place the lens bottom down.