Photography please

1, Nikon D7000 18- 105, it should be absolutely no problem to shoot products.

2, the film still recommends RAW, if you are not satisfied, you can repair it later. I won't elaborate, you should know better than me.

3. It is suggested to use professional color correction software to adjust the monitor. If your monitor itself is color cast, the color tone will not be accurate. If the display of your product is also color-cast, it will get bigger and bigger. Only by adjusting your monitor to ensure that the picture is correct, a little deviation of the monitor from the picture is acceptable.

4. It is recommended not to focus too much on the photographic lamp. At least you haven't shot the effect you want with so many lights so far.

5. You can compare the background colors of the above picture and the below picture. I think the picture above should be on a white background. You should know that the camera considers the whole picture when calculating the color temperature, hue and exposure. So if you use a white background, it will greatly affect the color temperature you set.

6. Look at the picture below. The background color used is good, similar to the chromaticity of "gray card", and visually close to the gray level of 18%. This will basically not affect the color temperature. I think this is also the experience accumulated by the photographer in the picture below.

I hope it works for you.