What is the general size of ps poster? -ps poster size?

Specification setting for poster printing using PHOTOSHOP Specification setting for poster printing using PHOTOSHOP

First of all, it must be printed in cmyk mode, and the color mode of the document should be adjusted when creating new files. If you adjust the color after finishing, there will be some changes, but the problem is not very big. =

In addition, the higher the resolution, the better, but higher than 300 should be meaningless, and if you want to make a large poster, the resolution can be reduced appropriately.

Specification =. It's up to you. If it is a school assignment, 120*90cm ... make a big display board.

In addition, since it is to be output, it should be cmyk, and the color will change with rgb ... especially if it is made with Mac, there will be a big gap between the color made without cmyk and the color seen on the computer.

How many times do you print a half-opened poster with PS?

China paper size related specifications?

Thick paper: 889× 1 194 mm.

Poster size: 564×864mm585×800mm600×800mm, etc.

Orthogonal paper: 787×1092mm

Folio (half-open) poster size: 500×700 mm

How much is the printing of 2m * 1 m color printing poster?

I can only do inkjet printing, and the prices vary from place to place. I can only give you a reference. Can't I print a drop of paper? Isn't the machine very big? Did you put this specification on Yi Labao? Just make a light film or a dumb film with ordinary glue. Probably around 35 yuan!

What are the specifications for printing the original poster?

The resolution is 72 pixels/inch, and the size is determined by yourself.

What resolution is good for printing 70* 100 posters?

The resolution of 70x 100cm is about 200-300.

What formats does poster printing support?

I. The format of the printed file is as follows:

1.PSD format is the inherent format of Photoshop. PSD format can open and store images faster than other formats, and good storage layer, channel, path, mask and compression scheme will not cause data loss. However, few applications support this format.

2.BMP format is the inherent format of MicrosoftPain developed by Microsoft, which is supported by most software. BMP format adopts a lossless compression method called RLE, which will not affect the image quality.

3.PDF PDF(PortableDocumentFormat) is a file format created by AdobeSystems, which allows electronic documents to be viewed on the screen. PDF files can also be embedded in HTML files of websites.

4.JPEG JPEG (short for Joint Graphic Experts Group) is the most commonly used image format. It is the most effective and basic distortion compression format, which is supported by most graphics processing software. JPEG images are also widely used in making web pages. If the image quality is not high, but you need to store a lot of pictures, JPEG is undoubtedly a good way. However, it is best not to use JPEG format for image output printing, because it improves the compression quality by damaging the image quality.

5.GIF format is the most commonly used format for outputting images to web pages. GIF adopts LZW compression, and the color is limited to 256 colors. GIF format is represented by 87a and 89a codes. GIF87a strictly supports opaque pixels. GIF89a can control the transparency of those areas, thus greatly reducing the size of GIF. If you want to use GIF format, you must convert it to IndexedColor, so the number of colors is 256 or less.

6.TIFF Format TIFF(TagImageFileFormat) was developed by Aldus in the early days of Mac to standardize scanned images. It is the most widely used image printing format on Mac and PC platforms. TIFF uses LZW lossless compression method, which greatly reduces the image size. In addition, the most exciting function of TIFF format is that it can store channels, which is very beneficial for you to process images.

7.cdr format and AI format are both vector file formats. It is worth noting that files between different versions of corelDRAW cannot be universal, and illustrator does not have this restriction.

8.eps format is a format between vector and dot matrix images, which is widely used in printing industry.

9.WMF format: It is a mixture of bitmap and vector diagram, and is widely used in the field of graphic design.

10, PCD format: It is a special storage format of PhotoCD, which usually exists on CDROM. PCD files contain images with various resolutions from professional photography to ordinary display, and courseware can generally be reduced to the size of 640×480 pixels.

1 1, TGA format: simple structure, and can be easily converted with other formats. It supports 8-bit to 32-bit color depth, and 32-bit dot matrix images include 8-bit alpha transparent channels. This format has been widely used in the field of computer professional video.

Second, poster advertisements are printed as pictures in TIF format. Although the file is relatively large, the printed poster is more realistic.

Moreover, the color mode of the picture must be cmyk, otherwise there will be more serious color difference. This is because the poster printing machine is cmyk four-color printing. When the designer delivers the printed poster file, it is best to click on the picture to see if the picture mode is cmyk, and then save it in PSD format. Poster printing factory requires 300 pixels/inch for small posters and 80 pixels/inch for large posters.

How big should the specifications of PS posters be?

25 cm *50 cm

Can the print shop make posters?

General print shops do not have this business, but there are also individual print shops that can do other people's advertising and other business. You can go to a professional advertising store to do it. The price is calculated in square meters, depending on whether you cover the film, the quantity you make, whether you spray paint or * * *, and so on. These prices are different. Generally around 30 to 40 yuan. You should go to the store and ask. They all have samples.

Isn't it fresh to use photoshop as a poster and print small pictures?

The clarity of the picture mainly depends on the resolution of the image!

This is the same as taking pictures with you!

Printer paper specification setting

Click Start-Control Panel-Hardware and Sound Effects-Printers (or Printers and Faxes)-Right-click Printers-Select Printing Preferences-Select a specific paper.

Ps poster size? Generally, the poster size is square quarto (540cm*390). If printed, the resolution should reach 300dpi.

Standard size:

13cm× 18cm, Dao 19cm×25cm, 30cm×42cm, 42cm×57cm, 50cm×70cm, 60cm×90cm, 70cm× 100cm.

Poster size, commercial poster size:

50 cm× 70 cm, 57 cm× 84 cm.

Movie poster size:

50cm× 70cm, 57cm× 84cm, 78cm×100cm.

Extended data:

Ps is AdobePhotoshop, or PC-side P-picture software. We still have to understand this. Tips for using ps: When using ps, we can use more shortcut keys to operate, which will be faster and get twice the result with half the effort.

Among them, the shortcut key of the mobile tool is V, the shortcut key of the straw tool is I, the shortcut key of the quick selection/magic wand tool is W, and the shortcut key of the marquee tool is M.

PS is the abbreviation of photoshop, a drawing software. It usually means that this picture has been manually processed and is different from the original picture. Another meaning refers to the abbreviation of postscript, which means postscript in Chinese.

PS, AI poster size PS, AI poster size canvas creation size: 200cmX200cm, resolution 150, color mode CMYK. PS, AI canvas size units can be converted.

If it is 2M, 200CM is enough.

The clarity of PS photos depends on the resolution you fill in. I don't know how big you need to make. In ai, the maximum size does not exceed about 5779 mm

In ps, the maximum size does not exceed about105833 mm.

If the size is very large, you can reduce the poster size in equal proportion before drawing. The canvas is the same size as yours, and then the resolution. Your picture is photo /uv and the resolution can be 80- 140. Printed matter with a resolution of at least 300-600 dpi, printed in PVC, can be 300-800DPI. Vector software can only spray pictures by exporting JPG, so pay attention to the resolution at this time.

Designers should not only understand design, but also understand materials and technology.

For example, the KT board you made, one is photo superposition, and it can also be printed by UV, which was not possible in the past. In recent years, flat UV printing is very popular, and it can be printed directly on KT board.

The maximum specification of KT board is 1.2*2.4. What you need to spell is the size: 2x2mAI is vector software, which can enlarge the resolution infinitely in any case.

Ps resolution 72 can be printed first, KT board is not printed, but after you make a picture and spray it indoors or outdoors, its material is gummed, so you can let them stick it on KT board where the picture is sprayed.

Second, build a canvas as big as your finished product.

Third, the resolution of 72 is enough, as long as the material on the original picture is clearly printed. If you want to print on paper, you need 300 resolution, but you don't need to print.

Fourth, the size you want to make, whether it's a photo or a KT board, needs imposition. I remember that the width of the photo machine is usually 150 or 180. The size of KT board is 120*240. In order to save money, I suggest you change it.