Traditional Culture Encyclopedia - Photography and portraiture - How to disassemble the tripod head

How to disassemble the tripod head

For a photographer, tripod and tripod are no strangers. The tripod head is one of the most important auxiliary equipment for photography, which can provide a movable platform for camera equipment and facilitate composition. Using tripod and tripod head well can improve our photography. But it is not easy to make good use of this pile of things. How to use Yuntai? How to remove the tripod head? The following small series will teach you how to use and disassemble tripod and tripod head correctly. First, how to use Yuntai?

1 First of all, we should understand a basic composition of tripod. In fact, tripod is divided into two parts: tripod and tripod.

2. The pan/tilt is divided into a frame part, one is the top of the camera and the other is the pan/tilt control part. Generally, there are four control valves, the top one is mainly used for assembling and disassembling the version, and the body part has three, which mainly control different functions.

3. Usually, the control valve of the top frame has a liquid level gauge. After unscrewing the valve, press the protector, and you can pull out the quick assembly board and screw it on the bottom of the camera. Pay attention and then tighten it with coins to ensure it is firm.

4, tripod generally has three rubber valves, this is mainly used for telescopic tripod, telescopic tripod when rotating rubber valve.

Finally, there is a pole in the middle of the tripod, which is the extension height. There is a rotary valve at the top of the tripod. After unscrewing the valve, the rod can be pulled up and restored to its original state after use.

Second, how to remove the pan/tilt?

1. First, find a rotatable knob at the joint.

2. Then twist it clockwise to separate it from the pan/tilt.

3. Then hold the pan/tilt by hand, and you can take it off.

4. Then remove the bracket, pull the horseshoe upward to separate it from the foot tube, and then remove the bracket.

5. Then turn off the universal wheel, press the silver button and turn the universal wheel.

6. Finally, the tripod head is disassembled.