Apple's 6P photo suddenly blurs and can't be focused. What is the reason?

The picture of Apple's 6p suddenly became blurred, which was caused by the failure of Apple's camera program. Try the following methods to solve the problem:

First check whether there is oil and dust on the camera surface of Apple's mobile phone camera to ensure that there is no oil around the camera.

2. Turn off the phone and restart it, wait for the camera to turn on again, and check whether the focusing function has been restored.

Third, upgrade Apple's mobile phone to the latest IOS system, and check whether the camera can be used normally after the upgrade.

1. Take Apple 6p as an example, find the "Settings" icon option on the desktop of iPhone6p, and click "Open" to enter.

2. In the phone settings interface, find the "General" column option and click "Open" to enter, as shown below.

3. After entering the general interface, click the Open button to enter the "Software Update" option, as shown in the following figure.

4. After entering the software update interface, click Install Now to upgrade the IOS system of Apple mobile phone.

Note: If the above methods fail to solve the problem, you can take the warranty card and invoice to the Apple after-sales service center for inspection and maintenance.

Extended data:

Matters needing attention in taking photos with mobile phones

1, anyone who has a little knowledge of light and mode adjustment knows that light is an important factor for good or bad imaging. Mobile phone cameras, like cameras, have high requirements for light. Therefore, if you want to shoot good works, you must choose good lighting conditions and try to avoid backlighting.

Some mobile phones can meet the light source through external conditions, and can also be adjusted through the built-in auxiliary functions of the mobile phone:

① Adjust the brightness. Many mobile phones can adjust the brightness of the camera and can be used when the light is insufficient.

② Night mode. It can be used not only at night, but also in night mode in case of insufficient light during the day to obtain better brightness. It's just that it takes a long time to take a picture after turning on this mode. If your hands shake slightly, the photos you take will have double images.

3 Flash. The flash on the mobile phone is actually a bright LED light, which can effectively fill the light when turned on, but the effective distance is relatively short, which is suitable for close-up shooting.

2. Coordinate hand holding and shooting posture. Users who like to take photos with their mobile phones may be deeply touched. The camera phone is only that big, and its weight is less than half that of a traditional camera. If you are not steady when shooting, even the best light will be ugly. In particular, CMOS cameras are more sensitive, and slight vibration will directly affect the imaging effect.

When shooting, the right hand holds the camera at the subject, and then the left hand holds the right hand to keep it stable. Because the response speed of the mobile phone is not as fast as that of the camera, it is not taken immediately after the camera shutter is pressed, but only when the shutter sound rings, so it is best to set the shutter sound when taking pictures, and the mobile phone must be held firmly when taking pictures.

Especially when you press the camera function key, if you move at this time, the picture you take may be blurred, so you must keep a steady posture until you take a picture. ?

3. Pay attention to the parallelism between the mobile phone and the scene. If your photography skills are not good enough to freely use the perspective, you must pay attention to the parallelism between the mobile phone and the scene when shooting, that is, the plane where the mobile phone is located should be parallel to the plane where the scene is located, especially when shooting beautiful MM. If you don't master it well, the portrait will be easily deformed.