How to catch birds? Six moments teach you how to do it.

Usually, birds have obvious behavior characteristics before taking off. If it is a flock of birds, they often head up in the same direction before taking off, usually taking off against the wind, because the birdman will consume more physical strength when taking off against the wind. And many birds, such as wading birds, often defecate before taking off. In addition, any bird usually leans forward before taking off. Once these behaviors are discovered, we should pay close attention to them and be ready to press the shutter to capture the moment of takeoff. For many novices, the response may be slower, so when the bird shows these behavioral characteristics, press the continuous shooting shutter in advance until the bird takes off.

Take-off focusing

When shooting the moment when birds take off, it is the key to ensure the accurate focal length, otherwise it will fall short. Because the environment where birds stay is generally messy, it is not suitable for tracking and focusing methods such as artificial intelligence servo autofocus. Branches and weeds around birds will interfere with tracking and focusing functions and increase the difficulty of focusing.

fly

Because different kinds of birds have different flight characteristics, it is difficult for us to predict and shoot. Only by fully understanding the flight attitude of different birds can we successfully predict their flight direction, flight action and flight speed and capture wonderful flight moments.

Flight focusing and exposure

When a bird is flying, a single autofocus is difficult to succeed. Choosing artificial intelligence servo autofocus can track and focus the subject of the camera that is getting closer and farther away, which is convenient and effective. In addition, the multi-point focusing mode should be selected for focusing, so as to lock the target to the maximum extent and focus accurately in the picture with a single background. If the camera and lens have anti-shake function, vertical anti-shake function should be selected when panning horizontally, and horizontal anti-shake function should be turned off. Otherwise, the camera will treat the bird flying horizontally as a kind of jitter and anti-shake, but the bird is blurred.

land

Birds will have relatively fixed resting places, such as rocks, wooden stakes, dry branches, bird's nests and so on. After being discovered, you don't need to chase birds with a camera, just focus on the stopping point, construct a good map, control the depth of field, and wait for the moment when the birds land.

Landing focus

The environment where birds land is generally chaotic. Just like during take-off, the auto-tracking focusing mode will cause the focus to shift and fail to focus due to weeds and branches around the landing site, thus delaying the shooting opportunity. Therefore, it is suitable to use manual focusing mode when shooting landing pictures. If the camera has the function of ultrasonic motor at the same time, the single autofocus mode can be used. When the focusing mode is found to be incorrect, you can directly use manual focusing to assist focusing, which is clear, fast and effective.

About how to catch birds. 6 minutes to teach you how to do it, and the global Ivy Bian Xiao will share it with you here. If you have a strong interest in the later stage of film and television, I hope this article can help you If you want to know more about camera skills, post-editing methods and materials, you can click on other articles on this site to learn.