Usage and schematic diagram of camera

The usage and illustration of the camera are as follows:

Tools/raw materials: camera, TF card.

1, prepare a TF card before shooting, including 8G, 16G, or even larger. It depends on personal needs. Insert the card into the camera slot. Then you can start taking pictures.

Step 2: Turn on the camera. Turn the switch to the mode/desk position. At this time, the camera ready light is on, and you can choose camera shooting, photography, recording and other operations.

3. In most cases, we always take photos with our camera in our hands, so in the process of taking photos, we should ensure the stability of the camera and then press the button to prepare for shooting. When shooting, you will see the display light flashing. Blink three times alone when taking pictures.

4. When shooting a voice-activated camera, put the switch in the position of S-REC/CAM. When it is turned on, it will enter the voice-activated standby mode. When you can hear the sound, you will turn on the camera. The average time is two minutes.

5. When shooting a computer camera, put the switch in the position of S-REC/CAM, and then connect it to the computer with a data cable.

6. If you want to format the TF card when it is turned off, press the Record key first, and then press the POWER key in the REC for formatting after three seconds.