How to use the domestic atomizer?

Put the atomizer flat in the water container, and then inject clean water into the container until the water level exceeds the atomizing sheet by about 50mm (that is, the water level should exceed the portal or the 1-shaped sensor head by 0.5-2cm). Connect the power cord between the atomizer and the transformer, and then connect the transformer to the power supply (note that the input voltage of the transformer must match the local voltage). The LED indicator light on the atomizer glows, indicating that the atomizer is in the running state, and at the same time, fogging is started, resulting in a small fountain. Without LED atomizing movement, water mist is directly generated.

Cover the atomizer mask and you can do atomization inhalation. The atomizer has the function of automatic water cut-off. If the water level is lower than the sensor, the atomizing head will automatically stop working, and long-term dry burning will damage the atomizer.