Basic methods of indoor single interview lighting

The basic methods of single interview in lighting room are as follows:

1. Select the scene and determine the camera position. Generally, you will choose a position with depth to set the plane. For example, the angle of inclination of a window or room.

2. To locate the interviewee, people are usually placed on the left side of the picture 1/3, and the line of sight faces the blank side.

3. Turn off all the field lights and interference light sources, raise the dysprosium lamp of 1.2k, put it on the oblique side of the background, and block the light with a hood of 1.2k and a black flag to make strips of light and shadow on the background.

4. Determine the working aperture of the camera, set the basic frame rate of 25 frames, the shutter angle of 180 and the sensitivity of 800. With the illumination of background light as reference, determine the working aperture as T4 (is it important to determine the working aperture? )

5. Cloth is the main light. Erect a 4 * 4m butterfly cloth in front of the interviewee's right, erect a 3m pineapple parallel to the back of the butterfly cloth, and then erect a 4K dysprosium lamp on the side between the butterfly cloth and the rice pineapple. The optical center of 4K dysprosium lamp is opposite to the center of rice pineapple, which produces diffuse reflection, and the light is reflected to the butterfly cloth through rice pineapple, which expands the light source area and softens the light again.

6. Set a 4*4m black cloth perpendicular to the back of the butterfly cloth to block the interference of the main light scattering on the background; Set up a black cloth 0.5 meters in front of the parallel butterfly cloth to block the scattered light above the butterfly cloth.

7. Cloth auxiliary light, supporting a 6-meter pineapple at the position of 45 in front of the interviewee's left to reflect part of the main light, illuminating the shadow of the interviewee's left face and reducing the contrast.

8. Put a 7-meter pineapple under the front of the interviewee, which also reflects part of the main light and fills the shadow of some characters' necks.

9. Backlight: Set an 860 LED lamp at 45 degrees above the interviewee's left rear, and install a soft light cover to make the interviewee's shoulder and neck display side backlit, thus separating the characters from the background.

Summary: The focus of interview lighting must be to be big before small, to make the background first, to determine the working light hole, and then to be the main body.