What should I do if the iphone camera gets dusty?

1. First unscrew the two screws on the bottom of the iphone with a screwdriver. The screw on the mobile phone is too small. Be careful not to lose it. Some screws have different specifications. Remember the corresponding position of each screw in the mobile phone.

2. Suck near the Home button with a sucker, and then gently pull it up. After opening a gap, use the flip cover to pry the screen completely around the gap.

3. First remove the cover of the cable with tools, and then gently pry the cable out of the motherboard to separate it.

4. Remove the cover plate of the battery cable and pry the cable out.

5. Remove the five screws on the cover plate of shielded cable and remove the cover plate.

6. Wipe the camera with a cotton swab dipped in proper amount of anhydrous alcohol.

7. Replace the camera. Subsequently, it will be restored according to the reverse steps of disassembly. When installing each cable buckle, pay attention to the light action, and the buckle will make a slight click when it is installed correctly.

8. Don't try to restore the screen at this time. Press the power button to see if the phone is turned on normally. If it does not open normally, please check whether the above steps are wrong.