How to control computer mouse with keyboard

How to control the mouse with the keyboard? No mouse button

You can open the mouse button without it. Use the numeric keypad to move the mouse on the screen. The operation steps are as follows:

1. shortcut key "Alt+Shift+NumLock" pops up "Enable mouse button?" Box, because there is no mouse, you can't press the "Yes" key, but you can press "Enter" to open it;

2. Then you can start to move the mouse on the screen with the numeric keyboard, and the operation box for setting mouse buttons will pop up. Because of the confirmation in the previous step, the mouse button is enabled now, as shown in the red box below;

3. You can set keyboard shortcuts according to your personal needs, as shown in the red box below;

4. You can set the maximum speed, acceleration and shortcut keys of the pointer speed according to your personal needs, as shown in the red box below;

5. For other settings, please use the mouse button. Whether NumLock is turned off or enabled at this time is also based on personal choice, as shown in the red box below;

6. Then operate the "Apply" button to save the settings, as shown in the red box below, and you can officially start using the mouse button.

The mouse is broken, how to control it with the keyboard?

Method 1:

1. Press Alt, Shift and NumLock at the same time to enable the mouse button. (If not, please search for "Easy Access Center" in the start menu, find and enter "Make the mouse easier to use" and select "Enable mouse button".

2. Select 1, 2, 3, 4, 6, 7, 8 and 9 keys of the keyboard (the number area on the right) to control the mouse image to move in the specified direction, and select 5 keys to click.

3. Enter the mouse button settings to adjust the mouse movement speed.

Method 2:

You can control the mouse through Windows speech recognition.

Method 3:

Enter an administrator account and reset permissions.

According to the specific types of problems, step disassembly/cause principle analysis/content expansion, etc.

The specific steps are as follows:/The main reasons for this situation are

How to control the mouse 1

0 1 Open the control panel and click Easy Access.

After entering the easy access page, click to change the working mode of the mouse.

On the change mouse working mode page, click the set mouse button.

On the mouse button setting page, check the enable mouse button, set the pointer speed, click Apply after setting, and then click OK.

Close the window, then press Alt+ Left Shift+NumLock to activate, and press the numbers on the numeric keyboard to control the direction of the mouse.

How to Control Mouse 2 with Keyboard

1. Right-click the start icon to open the control panel.

2. Select "Big Icon" and "Easy-to-use Setup Center" in view mode.

3. Click Change Mouse Usage.

4. In the settings page, make settings according to the text descriptions of each item, such as "pointer moving speed", "press Ctrl key to accelerate, press shift key to decelerate" and "use mouse button to turn NumLock on and off at this time". Press "OK" after setting, and the setting is complete.

5. If it is set to "Use the mouse button, NumLock will be closed at this time". When we turn off NumLock, we can move the mouse in different directions by pressing different numbers on the numeric keyboard. 6, 4, 2, 8 stands for east, west, north, south, 7, 9, 1, 3 stands for northwest, northeast, southwest, southeast, and 5 stands for the left mouse button. Pressing Ctrl will speed up the mouse movement.

How to Control Mouse 3 with Keyboard

Generally, you can use left ALT+ left SHIFT+NUMLOCK to start the mouse button.

First, open the control panel, select and open the auxiliary options, click the mouse tab, then click the use mouse button status box to make it a check mark, then click the setting button, adjust the mouse speed to the highest and fastest in the mouse button setting box that appears, and finally press the OK button in turn. At this point, the mouse and keyboard settings are complete. Let's talk about the use of mouse and keyboard.

The mouse keyboard is a numeric keypad with the mouse button function turned on. The specific key functions are as follows: the functions of the eight numeric keys except the "5" key and the "0" key correspond to the moving direction of the mouse icon, and the function of the "5" key is clicking; The "0" key is used to hold down; The function of the key ""is to release; The key "+"is used for double clicking; The "-"key represents the right key; The bond "*" represents the left and right double bonds; The function of "/"key is to restore the standard function of "5" key and click the left mouse button; The "NumLock" key is the switch key for numbers, mouse and keyboard. Various functions of the mouse can be easily realized through the mouse and keyboard, which are explained as follows:

Move the mouse icon. There are eight direction keys on the mouse keyboard. The buttons "8", "2", "4", "6", "7", 1 ","9 "and" 3 "are used to move the mouse icon up, down, left and right respectively.

Execute a program or open a document. Use the direction keys of the mouse keyboard to move the mouse icon to the name of the program or file, and press the "+"key to realize the function.

Has been selected. Move the mouse icon to the target and press the "5" key; Or open a document, move the mouse icon to the first position in the preselection area, press the "0" key, then move the mouse icon to the end position of the preselection area, and press "."and "Select" to realize these functions.

Drag and drop. Select the target, move the mouse icon to the selected area, press the "0" key, then move the mouse icon to the drag-and-drop destination, and press "."to realize the drag-and-drop function.

Cut and paste, copy and paste. Select the target, move the mouse icon to the target area or location, press the key "-"(to switch to the right mouse button), press the key "5" (equivalent to clicking the right mouse button), then move the mouse icon to the corresponding function of the pop-up menu, press the key "/"(to restore the function of the key "5" to the standard state of clicking the left mouse button), and press the key "5" to realize the function.

How to simulate a mouse with a keyboard

Using the keyboard to simulate the mouse and wheel is as follows:

Required materials: WIN7 system demonstration.

First, press the shortcut key to open the mouse button: left Alt key+left Shift key +NumLock key.

Second, after opening the shortcut key, the status bar will display the notification icon of the mouse button.

3. At this time, you can temporarily turn on or off the mouse button through the NumLock key, and the icon with a red cross is closed.

4. After turning on the mouse button, you can use the four keys on the keypad to simulate the mouse moving up and down, left and right. The key on the keypad replaces the left mouse button, the menu key in the large keyboard area replaces the right mouse button, and the Pgup key and Pgdn key can replace the mouse wheel to scroll up and down.

How does the notebook control the mouse pointer with the keyboard?

First, generally use left ALT+ left SHIFT+NUMLOCK to start the mouse button. Clever use of Windows mouse button _ mouse is convenient and powerful for Windows users, but poor mouse performance or failure often makes users very upset.

Secondly, this paper introduces a method of simulating mouse operation with keyboard, as follows.

1. First, open the control panel, select and open the auxiliary options, click the Mouse tab, then click the Use Mouse Keys status box to make it a check mark, then click the Settings button, adjust the mouse speed to the highest and fastest in the mouse key settings box that appears, and finally press the OK button in turn.

2. At this point, the mouse and keyboard are set. Let's talk about the use of mouse and keyboard. _ Mouse Keyboard is a numeric keypad with the mouse button function turned on. The specific key functions are as follows:

1. Eight numeric keys except "5" and "0" are used to correspond to the moving direction of the mouse icon, and the "5" key is used to click; The "0" key is used to hold down;

2. The function of the key ""is to release; The key "+"is used for double clicking; The "-"key represents the right key;

3. The bond "*" represents the left and right double bonds; The function of "/"key is to restore the standard function of "5" key and click the left mouse button; The "NumLock" key is the switch key for numbers, mouse and keyboard. Various functions of the mouse can be easily realized by using the mouse keyboard, which is explained as follows: _ Move the mouse icon. The mouse and keyboard have eight direction keys.

4. The functions of buttons "8", "2", "4", "6", "7", 1 ","9 "and" 3 "are to move the mouse icon up and down, left and right respectively. When the key is pressed, the mouse icon moves up and down.

5. Execute the program or open the document. Use the direction keys of the mouse keyboard to move the mouse icon to the name of the program or file, and press the "+"key to realize the function. _ has been selected. Move the mouse icon to the target and press the "5" key;

6. Or open a document, move the mouse icon to the first position in the preselection area, press the "0" key, then move the mouse icon to the end position of the preselection area, and press "."to realize the "Select" function. _ Drag and drop. Select the target, move the mouse icon to the selected area, press the "0" key, then move the mouse icon to the drag-and-drop destination, and press "."to realize the drag-and-drop function. _ Cut and paste, copy and paste.

How does the keyboard control the mouse?

1. Set the keyboard to control the mouse.

Start Menu-Control Panel-Accessibility Options-Mouse Tab-and then click Select Use Mouse Button.

In this way, the keyboard can be used to control the cursor of the mouse. The mouse keys of the simulated mouse refer to the small keyboard (numeric keyboard) on the right side of the keyboard, and the NumLock key should be in an effective state when used. You can also click the "Settings" button next to you to make detailed settings such as mouse movement speed, NumLock key status and shortcut keys. If the sticky keys in your system are available by default, you can also press the left and right shift keys of the keyboard five times, and the sticky keys tab will pop up. Click "Settings" to switch directly to the "Mouse" tab.

2. The mouse button corresponding to the keyboard:

Move: 8, 2, 4, 6, 7, 9, 1, 3 keys, eight directions.

Long-distance movement: Ctrl+ above eight keys (that is, accelerating movement)

Select the left mouse button:/

Select the right mouse button:—

Click: 5

Double-click:+(or double-click "5")

Resistance: 0 (inch)

Release:. (Del)

Click the left mouse button and press (/) and then press (5) or directly press (5); Double-click means double-click (5) or press (+); Right-clicking means pressing (-) first and then (5). To switch back to left click, you need to press (/) first, or press the right key on the keyboard to right click (next to the right Ctrl key). Drag the window to the title bar of the window first, then press INS, then use the "Move" key (8, 2, 4, 6, 7, 9, 1, 3) to move the window to a suitable position, and finally press Del to release it. Drag files or folders in a similar way.